12:15:10 From Bob Turner : Howdy from New Mexico!! Cooling off here!! Yeaaa!!! 12:16:35 From Glenn Workman : Hi all. 12:19:32 From kennethpage : It’s beautiful here in Kansas City. 12:19:56 From Benoit Widemann : Good anytime all 12:20:23 From Neil McCarroll : Bonjour Benoit! 12:20:30 From Adam Goldman : https://downdetector.com/status/zoom/map/ 12:23:02 From darrellsmith : Yo! 12:23:28 From Neil McCarroll : Yo right back at ya! 12:23:32 From Glenn Workman : You Darrell 12:23:40 From Adam Goldman : HECKLER!! 12:23:42 From Terry Leigh Britton : Yay! Webinar! 12:24:36 From Terry Leigh Britton : Is this Mac-only software? 12:24:37 From Wayne Pronzati : I’m old school with a mouse. Guess I’ll have to pony up for a trackpad. 12:25:02 From Glenn Workman : https://audioswiftapp.com 12:25:03 From Terry Leigh Britton : I have a trackpad I never use that this would be cool for! 12:25:18 From Glenn Workman : There is a 15 day free trial 12:25:33 From Bob Turner : I'm like you, Wayne! I do EVERYTHING with my mouse! 12:25:38 From Terry Leigh Britton : Ugh - figures, Mac only. 12:26:56 From Terry Leigh Britton : Adam was heckling you, Darrell. 12:27:24 From Glenn Workman : Timmy is actually in his own room! 12:29:10 From Terry Leigh Britton : I call product placement, Bradley! 12:29:23 From Zab Skornik : Hi there 12:29:39 From Bradley DePasse : $.50 Double Cheeseburger?* Aww Yeah. Celebrate National Cheeseburger Day—and make it a double with this App-exclusive deal. Order in the App and select Drive Thru or Curbside pickup. 12:29:42 From David Gottshalk : Hello Everyone 12:31:14 From Charlyn Bernal : He was really down to earth 12:33:32 From Ray Toler : The SUN? What is that? I’m in the Portland area… haven’t seen it for awhile. 12:34:07 From Björn Lindén : Sun ? A Unix computer ? 12:34:07 From Bradley DePasse : How about Wally Badarou as a guest! 12:34:12 From Ray Toler : Suzanne Ciani has shown up at least once or twice. Would LOVE a session with her. 12:34:22 From Tim Valkenburg : Oooooh Pat Metheny! yesss pleaaassse 12:34:22 From steve ertel : I would PAY to have Pat Metheny here. 12:34:34 From Bob Turner : Dave Coz?? 12:34:40 From Tim Valkenburg : I’ll pay too 12:34:40 From Adam Goldman : Darrell: now’s your chance 12:34:45 From Aaron Evans : Is this webinar just starting? Not sure if I got the right time. 12:34:55 From Adam Goldman : Aaron…yes, just starting 12:34:55 From Glenn Workman : Aaron: Yes, just starting. 12:35:01 From Adam Goldman : What Glenn said. 12:35:14 From Ray Toler : lol. I almost typed “What Adam and Glenn said” before you both said it. 12:35:34 From Adam Goldman : Darrell: When? 12:36:47 From Ray Toler : Yay Adam 12:36:52 From Tim Valkenburg : Yaaaay 12:36:52 From Bob Turner : Matt... I would like a session with LL Cool J. That would be fun!! 12:37:19 From Ray Toler : My WIFE would pay for an LL Cool J webinar. 12:38:07 From Ray Toler : I didn’t know we were supposed to upgrade our monitors before today’s webinar. 12:38:18 From UltraVioletIdea.com (gReg Silvus) : Is Matt gonna introduce Adam? ??? ??? ;-) 12:38:27 From Ray Toler : Jumbotron installation isn’t scheduled until next week. 12:38:57 From Glenn Workman : Skysong Productions√ Releaux√ 12:39:00 From Glenn Workman : (not sure who this is) 12:39:06 From rpedraza : Is there a way to just scale DP? Sounded like you were hinting there was 12:39:06 From Ray Toler : Releaux is me. 12:39:36 From Glenn Workman : rpedraza: yes, command + or - 12:40:15 From Russ Pfeifer : One of my most used windows 12:40:17 From rpedraza : Oh ok, I thought he meant the transport 12:40:22 From Glenn Workman : Thanks Ray. Just didn’t know who was paying for some of the AudioSwift purchases. 12:40:23 From rpedraza : I know about tracks 12:40:41 From Russ Pfeifer : Love the Midi Monitor 12:40:44 From Ray Toler : TOLER <>RELOT <> (pass through the cajunizer) <> Releaux 12:42:37 From darrellsmith : Warren: Happy belated birthday! 12:43:37 From Glenn Workman : https://audioswiftapp.com - There is a 15 day free trial of this software. The cost is normally $24, but there is a 30% discount until 9/30/2020 12:44:29 From kennethpage : I already know the I could really use this. 12:45:24 From john mazzei : Does it jump to where you put your finger or can it be set to “pick up” from where it currently is? 12:45:34 From John Flaherty : Adam, could you show an example of this in action, in a project? 12:45:41 From Ray Toler : I’m not sure if I’ll find a use for it in my home studio, but I’ll definitely be packing a BT trackpad for use when traveling. 12:46:03 From Glenn Workman : john m: Their is a preference for it to be relative to where you place a finger, or have your placement be from the current value. 12:46:42 From Ray Toler : XY functions would be the most likely candidate for me at home. 12:47:19 From Ray Toler : But my Wavestation Plug is going to be very happy with this. :) 12:48:11 From Caxa : Yup I can use the XY 12:48:12 From john mazzei : Great! Thanks Glenn! 12:48:28 From john mazzei : Yeah Wavestation is a perfect candidate! 12:49:14 From Glenn Workman : The WaveStation stuff was intellectual property bought from Sequential Circuits (who made the Prophet stuff). 12:49:32 From Ray Toler : Motunity™ 12:49:43 From darrellsmith : MOTUnity! 12:50:00 From James Paschall : MOTUnity™ 12:50:04 From Jose Gonzalez Palma : Hey Matt, for back to Basics today could you do a quick sample of how to Route VEP through V-RACKS - into Audio Tracks for monitoring and Recording in our templates. Thank you. 12:50:07 From darrellsmith : I better get this trademarked. 12:50:11 From Jose Gonzalez Palma : If its not too much to ask 12:50:14 From James Paschall : It’s yours Darrell 12:50:25 From Ray Toler : You’ve got a provenance trail through these webinars, Darrell. 12:50:42 From James Paschall : +1, Ray 12:51:02 From Victor LeComer : U-he Zebra has multiple x/y controllers capacity. 12:51:15 From Ray Toler : Oooh, forgot about Zebra, Victor. 12:51:35 From DB : adam, do you think of using the app differently than the Touché? there are similarities. key differences you found? 12:51:40 From darrellsmith : Thanks Ray. 12:51:52 From darrellsmith : Not sure I earned it. 12:52:21 From Ray Toler : There are plenty of people who have benefited without earning something. Own it! 12:52:40 From darrellsmith : Ray: Nice. 12:52:52 From Ray Toler : (But I’m pretty sure you coined it) 12:53:02 From Terry Leigh Britton : This has been very informative even for PC users. I have other software that works similarly, now I have knowledge how to use it in DP with plugins! 12:53:17 From darrellsmith : I did. 12:54:30 From Ray Toler : “‘MOTUnity’” is a registered trademark ® of Darrell Smith Industries.” 12:54:48 From Russ Pfeifer : DSI 12:54:49 From kennethpage : Can you move around using the arrow keys on your qwerty 12:54:54 From James Paschall : To the Library of Congress it goes! 12:55:01 From Ray Toler : DSI is owned by somebody else. ;-) 12:55:11 From darrellsmith : How does Adam program these features? 12:55:36 From Barry Nelson : Anyone using the new RX8 from Izotope? 12:55:57 From kennethpage : I’m still on 7 12:56:00 From Roque Baños : Could you paste the website for this Adam? 12:56:11 From Glenn Workman : https://audioswiftapp.com 12:56:26 From Roque Baños : Thanks Glenn! 12:56:35 From James Paschall : Maybe an after party for programing, Darrell? 12:57:15 From Ray Toler : Darrell, they have some video tutorials at the site: https://audioswiftapp.com/tutorials/ 12:57:30 From Ray Toler : I haven’t really kicked the tires yet, but it looks pretty straightforward on first glance. 12:58:10 From darrellsmith : Thanks Ray. 12:58:20 From James Paschall : Ray, I tried a Wacom tablet last night…got it to recognize the modifier keys. Just that has great function for me. 12:59:08 From Glenn Workman : Darrell/Ray: Yes some very thorough instructional videos, though none specific to DP. 12:59:17 From Barry Nelson : Kenneth, You happy with RX7? Worth it? 12:59:31 From Glenn Workman to Bradley DePasse (Privately) : Did I accidentally put your hand down? Or is your question for later? 12:59:42 From Ray Toler : I’m not sure which Wacom model you have, but I’m thinking of my giant one from when I was doing a lot of design work. Made me laugh thinking about a 450mm long-throw fader. 12:59:54 From kennethpage : Barry. I haven’t use it much but it is worth it. It does a wonderful job. 13:00:01 From Nozomi Takasu : @Barry I’m 7 too. still strugling to effectively use 13:00:09 From Ray Toler : Glenn/Darrell, then we commandeer Adam for an afterparty. 13:00:37 From Nozomi Takasu : @Barry how’s 8? 13:00:54 From Glenn Workman : MOTU After Party ™ today for those interested. 495 946 0805
863769 - begins about 10 minutes after this webinar finishes. 13:00:57 From darrellsmith : I’m up for an after party. 13:01:13 From Ray Toler : Barry, I’m *very* happy with RX7. it’s like magic. I’ve heard great things bout 8, but will be waiting to upgrade one of the bundles after they release a few more updated programs. 13:01:14 From Neil McCarroll : Barry, I’m on RX7 too, only bought recently and haven’t used it much. Hoping Izotope might offer a free upgrade... 13:01:31 From kennethpage : I’m not going to upgrade to 8. I’m waiting until RX adds more to the upgrade 13:01:34 From Sean Martin : Play a not Adam and show what it sounds like 13:01:39 From Sean Martin : *Note 13:01:41 From Ray Toler : Love the iZotope software, but their upgrade system is… convoluted. 13:01:49 From Victor LeComer : Re: AudioSwift - Can you assign the fader in the transport setting to the channel strip? That will then follow the selected track? 13:02:01 From Jefferson Jarvis : The BBC fader labeled “dynamics” actually changes the velocity sample layer 13:02:05 From Ray Toler : What kennethpage said. 13:02:17 From Bradley DePasse to Glenn Workman (Privately) : I just bought it! 13:02:31 From Bradley DePasse : I just bought it!! 13:02:45 From Neil McCarroll : AudioSwift also seems to work on built-in MB Pro trackpad - not just Magic Trackpad. 13:02:54 From Glenn Workman : Victor: One of the videos for Logic Pro showed something similar like that, so I don’t know if DP acts the same. 13:03:16 From James Paschall : Ray, It doesn’t say what model…Bamboo or Intuos a little smaller than the iPad. But it has four top buttons that correspond and respond to control, shift, command, option in DP. 13:03:25 From Alle Segretti : yes I'm using it with MBP built in track pad 13:03:35 From Alle Segretti : already saved me a lot of effort 13:03:38 From Glenn Workman : Neil: Yes - both Magic Trackpads, the Magic Mice, the MacBook trackpad. 13:04:03 From Terry Leigh Britton : That would get ME out of bed! 13:04:04 From Neil McCarroll : This is deal breaker - SOLD! 13:04:07 From John Boyle : I’ve heard that Mozart story too, Adam 13:04:24 From Ray Toler : It’s like the Looney Tunes gag with Yosemite Sam and the xylophone. 13:04:43 From Russ Pfeifer : Deal-maker? 13:04:44 From Glenn Workman : No no no you long haired galoot! 13:04:45 From Terry Leigh Britton : Shave and a haircut... 13:04:51 From Ray Toler : “No! No! No! ya idjit rabbit!" 13:05:11 From Benoit Widemann : WHAT is that screen anyway?? 13:05:23 From Neil McCarroll : russ - yep :) 13:05:23 From Ray Toler : I’m going to try and work “long-haired galoot” into my daily vocabulary. 13:05:35 From Terry Leigh Britton : Shave and a haircut.... 13:05:38 From Jefferson Jarvis : To be clear: the “dynamics” fader in BBCSO does not send CC #7 (volume) data, it changes the volume sample layer that is being played 13:05:42 From Benoit Widemann : Makes me think of the wolf’s car in Tex Avery cartoons 13:05:58 From Benoit Widemann : (long isn’t it?) 13:06:35 From Terry Leigh Britton : Shave and a haircut.... 13:06:43 From Sean Martin : 2 bits 13:06:58 From Ray Toler : As Jefferson notes, Spitfire’s instruments use “Expression” (CC11) as an overall volume control, and “Dynamics” (CC1 / Mod Wheel) to move between the sample layers. 13:07:06 From Terry Leigh Britton : I've GOT you, Rabbit!!! 13:07:19 From James Paschall : Thanks, Adam Goldman! Ag not silver, gold! 13:08:06 From Barry Nelson : Haven’t got RX8 yet, but going to order today. I’m really interested in the music rebalance feature. Looks impressive. Thanks guys 13:08:19 From Ray Toler : Many of the Spitfire microphone mixes are set to controllers as well, but I’m not positive if they’re standardized across all of their libraries. 13:09:11 From Alle Segretti : Adam show View 2 which is dual XY 13:09:37 From Ray Toler : For BBCSO, I mapped faders to Mix 1 (CC 22), Tree (25), Center (24), and Spill (40). But 90% of the time, I’m only using Mix 1. 13:09:50 From Glenn Workman : Numbers 1-5 change the mode. Its very flexible and the owner/programmer is very responsive to email. 13:10:04 From Benoit Widemann : Actually I haven’t purchased the full Spitfire stuff yet, still considering. I’m playing with the ‘light’ versions, which are cool, but their control ability appears lilmited. 13:11:06 From Neil McCarroll : Barry - often most cost-effective to buy as part of Music Production Suite bundle. All excellent tools. 13:11:15 From Ray Toler : Benoit, it’s entirely dependent on the library. Some (BBCSO, for example) don’t have a ton of sample layers. The Studio and Symphonic Orchestras are a lot more deeply sampled. 13:12:22 From Dan Wool : Has ‘Keyboard Maestro for DP’ been done in webinar? 13:12:27 From kennethpage : Thanks Adam & Glenn> NICE. 13:12:34 From Glenn Workman : Dan: No it hasn’t 13:12:39 From Sean Martin : Great presentation Adam 13:12:41 From Benoit Widemann : Ray: yes, I guess so. Still considering. Sounds great anyway. 13:12:47 From Ray Toler : In case anyone needs it, here’s my DP translation of the Spitfire BBCSO template. https://www.dropbox.com/s/mi44r580h8s54ni/BBCSO%20Digital%20Performer%20Template.zip?dl=1 13:12:50 From John Boyle : Nice work Adam 13:12:51 From darrellsmith : When? 13:12:52 From Bob Turner : Good Job, Adam!!! 13:13:05 From Victor LeComer : Thx, Adam! 13:13:10 From Russ Pfeifer : Thanks Adam! 13:13:11 From Benoit Widemann : Sliding on an iPad screen is not nice. 13:13:12 From Bob Turner : You just renewed your "Heckler's" license!!! 13:13:12 From Bradley DePasse : Thx, Adam! 13:13:13 From Nozomi Takasu : Thank you Adam! It was awesome! 13:13:14 From darrellsmith : Thanx Adam!!!!!!!!! 13:13:15 From jraoul : When what, Darrell? 13:13:17 From James Paschall : Tx, Adam! 13:13:20 From Adam Goldman : Brad: SPINNING BURGERS? WOW 13:13:20 From Glenn Workman : Thanks Adam. 13:13:26 From Adam Goldman : My pleasure, y’all 13:13:28 From John Flaherty : Thanks, Adam! 13:13:28 From Benoit Widemann : The glass doesn’t slides that well 13:13:33 From darrellsmith : DP 10 update JR 13:13:38 From Reed Robins : Nice work Adam! 13:13:45 From M &M : thanks Adam 13:13:46 From Timmy Samuel : Adam: my afternoon project is seeing if Audio Swift will work with a Wacom trackpad 13:13:46 From Terry Leigh Britton : RE-pin Matt 13:13:54 From UltraVioletIdea.com (gReg Silvus) : Cheers, Adam! 13:13:58 From Benoit Widemann : Cool Adam! 13:13:59 From Neil McCarroll : Thanks Adam - that was great :) 13:14:00 From Adam Goldman : Timmy….cool idea 13:14:06 From Adam Goldman : Thanks to all of you. 13:14:07 From jraoul : Oh, is there a DP 10 update coming? 13:14:11 From Ray Toler : Benoit, I’m very happy with my Spitfire stuff. BBCSO has a really nice coherency without needing much, if any, additional treatment. 13:14:14 From art2ro : Good job Adam!! 13:14:30 From darrellsmith : jraoul: Lol! 13:14:46 From Benoit Widemann : @Ray I’m quite tempted. But there are so many alternatives. :) 13:14:50 From Jose Gonzalez Palma : That was great demo, thanks Adam! 13:15:22 From Mark Rasmussen : Adam Nice Brother…Love that three lane trackpad concept 13:15:26 From Ray Toler : Benoit, definitely! We’re in a wonderful time for sample libraries. I’m building my base libraries with Spitfire because they largely work together, but OT, Cine… so many wonderful choices. 13:15:45 From Glenn Workman : If you need to ask a question: you can open the Participants panel and click the Raise hand button. Adam or Matt will send a request to unmute your mic to ask your question. If you want to save the chat - you can click the 3 dot bubble in the chat text area. It will save everything from when you signed on till when you click Save Chat. 13:16:06 From Ray Toler : Option-A is one of my most used commands. 13:16:17 From Benoit Widemann : Yes… but my wife won’t let me purchase all of them. :) 13:16:30 From jraoul : GW — I don’t see an option to raise hand, just rename, unmute, and edit profile picture 13:17:08 From Ray Toler : Benoit, my initial purchase was last year’s Christmas gift from my wife. 13:17:24 From Glenn Workman : jraoul: In the Participants panel - not the chat panel. 13:17:36 From jraoul : Yeah, that’s where I’m looking 13:17:43 From Glenn Workman : Not clicking on your head/image. 13:17:50 From jraoul : Oh, doh, sorry, down at the bottom. Got it. 13:18:10 From Ray Toler : Adding to my feature request list: include folders when setting multiple track colors. 13:18:18 From Rubens Tubenchlak : doesn’t work for me the double tapping but holding T or W 13:18:20 From Glenn Workman : jraoul: I see your hand up now. 13:18:39 From Ray Toler : Rubens, are you on DP10? 13:18:43 From Glenn Workman : Rubens: It may not be set that way in your Commands window. 13:18:48 From Rubens Tubenchlak : yes Ray 13:19:07 From Ray Toler : Hmm. Not sure if that’s a preference thing or not. It works for me. 13:19:08 From Rubens Tubenchlak : I am using the defaults 13:19:24 From Bradley DePasse : How do you turn off the temporary tracks? 13:19:35 From darrellsmith : Double tap again 13:19:36 From Reed Robins : Single tap T 13:19:46 From darrellsmith : oops single tap 13:19:50 From darrellsmith : I’ll stop 13:19:50 From Benoit Widemann : Besides using a template, is there any way to always start with ‘Rainbow’ tracks color scheme? ‘New’ always reverts to ‘Template’ colors… 13:19:56 From Bradley DePasse : ok 13:20:11 From Ray Toler : Benoit, change the color scheme, then resave your default template. 13:20:36 From Ray Toler : Sorry, read too quickly. I don’t think there’s a way to do it without using a template. 13:20:40 From jraoul : Not my raised-hand question, but on the current subject: what’s the difference between folders, groups, and W and T gatherings? 13:21:19 From Ray Toler : Folders are organizational. Groups are functional. W is a temporary group of all visible, and T is a temporary group of all selected. 13:21:22 From Glenn Workman : Benoit: When you create your Template, there is an option in the save window to “Use as default New Template” 13:22:17 From jraoul : Tx, Ray. Folders do have some functions, like enabling and disabling its members, right? 13:22:30 From Benoit Widemann : Glenn: found it, thanks. 13:22:44 From Ray Toler : Yeah, I was simplifying. I use folders to quickly en/disable VIs, as well as to quickly show/hide tracks. 13:22:51 From Glenn Workman : jraoul: Folders are mostly for display and organizing. Groups are for tracks you want to have identical behaviors when you do something to one it does it to all. The T/W create one time Temporary Groups of highlighted or shown tracks. 13:23:18 From jraoul : GW/RT Got it, tx. 13:23:19 From Jose Gonzalez Palma : Quick Question, Is there a way to set up the MIDI zoom options so that when we double click a region and open it in the MIDI window they are all visible automatically without having to do the zoom commands? 13:23:37 From Jose Gonzalez Palma : i looked in pref, but didn’t catch an option 13:23:45 From Neil McCarroll : BTW - one of the early webinars that has now been posted covers the temp groups stuff really well, along with the Re-Draw tool - well worth revisiting now that we are such experienced ‘experts’. 13:23:49 From Glenn Workman : Jose: They remember the state in which you left them (zoomed/quantization on/off etc). 13:24:17 From Ray Toler : Jraoul, I also tend to collect all of my MIDI tracks in one top-level folder, and all of my audio tracks in another. That varies from project-to-project, but I generally work in MIDI until I’m done composing, then print audio and hide MIDI stuff completely while working on the mix. 13:24:18 From Russ Pfeifer : Bradley just walked into the cheesbuger 13:24:20 From Glenn Workman : Jose: I set mine the way I like, and make that part of my template. 13:24:35 From jraoul : Ray- good tip! Tx 13:24:35 From Jose Gonzalez Palma : Ahh gotcha perfect thanks Adam and Glenn 13:25:06 From kennethpage : Adam & Glenn make a great team 13:25:20 From Jose Gonzalez Palma : Yes sir 13:25:34 From john mazzei : Seems like I used to be able to move notes in the MIDI editor by using the arrow keys. Has that been changed or is it a preference? 13:25:53 From Adam Goldman : JohnM: still works. 13:26:15 From john mazzei : OK I’ll try again. Thanks!! 13:26:34 From Adam Goldman : JR:Wow. Great background (as usual) and great disappearing act with the shirt. 😊) 13:26:41 From Glenn Workman : Those Change items have no key assigned by default. You can add key Commands to many functions in DP and assign whatever keys you like. There is a short video demonstrating how here: https://www.freqsound.com/motuuserfiles/TrainingVideos/CustomKeyBindings.m4v 13:27:04 From jraoul : Disappearing act? I’m just not wearing a shirt. 13:27:05 From Neil McCarroll : Kenneth - ‘Glamm’ like Brangelina 13:27:18 From Glenn Workman : john m: Can still be done, you can change the nudge amounts to make it work the way you like. 13:27:18 From kennethpage : Ha 13:27:20 From art2ro : John Mazzei, that function is called nudge, and it has some preference rules in the snap grid window I believe. 13:27:26 From jraoul : I ain’t got no body 13:27:27 From Rubens Tubenchlak : btw are you using Matt keybindings? 13:27:36 From Ray Toler : “Pay no attention to the head floating peacefully in a field of flowers!” 13:27:40 From Tom Lewis : Good job Adam; sorry I missed the beginning; gotta run CE webinar for my other hat (therapist). Have great weekend All 13:28:03 From john mazzei : Thanks! I’ll have to go in and set that up. I use it all the time and I’m tired of mousing (track padding) 13:28:04 From Neil McCarroll : Take good care Tom :) 13:28:13 From kennethpage : Bye Tom 13:28:15 From Adam Goldman : Bye Tom! 13:28:35 From Glenn Workman : Rubens: I don’t use Matt’s, I’ve been changing mine for years and keep adjusting them when I find a feature I all of a sudden find useful. 13:28:43 From darrellsmith : See ya Tom 13:28:56 From Ray Toler : If I end up getting a hamburger for lunch, it’s entirely Bradley’s fault. 13:29:00 From Nozomi Takasu : @Neil Any suggestion for me to look at for RX?? Like when you addressed me Npr youtube :D thought you might know good source 13:29:01 From James Paschall : Cheers, Tom! 13:29:08 From Adam Goldman : Ray: Catburger? 13:29:17 From Caxa : While I remember Plugin Boutique are selling Izotope’s BreakTweaker drum machine for $9.99… https://www.pluginboutique.com/product/1-Instruments/7-Drum-Machine/834-BreakTweaker-Expanded?utm_campaign=140333_PB%20-%20Friday%20NL%20-%2018-09-2020&utm_medium=email&utm_source=Newsletter&dm_i=6D39,30A5,1012AJ,BUCD,1 13:29:25 From paul : Was just going to say… Bradley, watch out!!! There is a giant hamburger stalking you! 13:29:35 From Ray Toler : That is a heck of a deal on BreakTweaker. 13:29:44 From kennethpage : Thanks Caxa, already got it 13:29:45 From Glenn Workman : There is an after party today 10 minutes after this one finishes: 13:29:45 From Glenn Workman : MOTU After Party ™ today for those interested. 495 946 0805
863769 13:29:53 From Roque Baños : HI GLENN, can you have a bus as an output default ? 13:30:08 From john mazzei : I’m very new to DP10 so I really appreciate these seminars. Plus going back over the basics always fills in gaps for me. Thanks! 13:30:24 From Glenn Workman : Roque: Do you mean for when you create a new track? I don’t think so. 13:30:32 From Jose Gonzalez Palma : Awesome thanks Glenn 13:30:38 From Russ Pfeifer : Thanks Caxa. Love the deal tips 13:30:44 From Roque Baños : When you drag from finder 13:30:53 From Ray Toler : John, I’ve been using DP for a long time, and I’m learning something all the time, even in these 101 sessions. It’s a wonderfully deep program. 13:30:58 From Glenn Workman : john m: Feel free to ask questions here. We’re all learning new stuff every time. 13:31:27 From john mazzei : Will do! Long time DP user, short time DP10 user! 13:31:30 From Glenn Workman : Roque: I don’t think so, you’d have to drag them to an existing track that has a Bus assigned as the output. 13:31:43 From Roque Baños : Thank you Glenn 13:31:57 From Paul Lenart : how do you set the level of audible mode 13:31:57 From Rubens Tubenchlak : great Glenn. I never dare before to change those but I can see I really should 13:32:00 From Caxa : @Russ np… 13:32:46 From Neil McCarroll : Hi Nozomi - I’m definitely not an expert on RX, however when I bought my Izotope products it included a year’s subscription to Groove3.com - they have some great training videos. I used PluginBoutique.com 13:32:58 From art2ro : Caxa, thanks for letting us know on that deal! 13:33:17 From Glenn Workman : Rubens: You can always save the keybindings from the mini-menu, then load or save different ones in case you ever want to revert to defaults. Matt’s keybindings have also been posted in our community area here: https://www.freqsound.com/motuuserfiles/ 13:33:30 From Caxa : Its a great plugin…. The sample libraries alone are worth ten bucks 13:33:32 From john mazzei : Is there a preference to have DP add a specified fade any time I do an edge edit? Seems like that would be handy in some cases. Save time. 13:34:11 From Neil McCarroll : JohnM - these are SO good, aren’t they! 13:34:30 From Rubens Tubenchlak : Glenn, I will try it 13:34:33 From Glenn Workman : john m: Fades can be a fixed duration when created. There’s a popup menu in the Fades window. Once set new Fades will have that fixed length. 13:34:45 From jraoul : Caxa — “great plugin” you mean Break Tweaker? 13:35:05 From Caxa : Yes 13:35:11 From Glenn Workman : john m: If a soundbite has a fade on it already and you edge edit, the fade stays the same length. 13:35:20 From Paul Lenart : is there a way to set the volume for audible mode? 13:35:36 From John Boyle : Nee to remember Holy Capoli 13:35:36 From john mazzei : So then I can select the soundbite and select “fade” and the preset fades will be applied to both ends of the soundbite? 13:35:49 From M &M : does, undo history stay with each chunk? 13:36:04 From rpedraza : Can you show creating like 16 drum tracks for one instrument? I always seem to crash DP trying to changing midi tracks to drum tracks 13:36:14 From Ray Toler : M&M, I think it’s project-based, not chunk. 13:36:16 From Dan Wool : An option or modifier to have fades applied on Edge Edit would be great 13:36:40 From M &M : thanks 13:36:41 From rpedraza : The midi view doesn’t seem to like switching back and forth from midi tracks to drum tracks 13:37:01 From Bob Turner : The wiper follows MIDI, but not Audio. 13:37:01 From chris : Yeah used to love that scrub in peak 13:37:11 From jraoul : Peak! 13:37:15 From jraoul : Sigh 13:37:15 From Glenn Workman : M&M: Undo history is stored for each project as a whole. 13:37:23 From Ray Toler : I thought there was a modifier key that let us do that, but maybe I’m confusing with Peak. Miss that program a lot. 13:37:31 From Caxa : @JR yes it’s a bit of an oddball, not the most intuitive drum machine, but it can do some unusual things.and has a lot of samples included. 13:37:40 From Dan Wool : It’d be nice if the wiper could be set to NOT scrub at all! 13:37:58 From jraoul : I don’t do drum machine programming, but it’s nice to have a good library of sounds 13:38:09 From jraoul : for regular sequencing 13:38:26 From Glenn Workman : Dan: Turn off the Audible Mode icon. 13:38:37 From rpedraza : I have a few drum modules 13:39:13 From Ray Toler : Re: scrubbing. From the manual: Scrubbing with the playback wiper You can “scrub” playback with the Track Overview playback wiper by dragging the wiper left and right (when Audible Mode is turned on.) For more information, see “Scrubbing multiple MIDI tracks” on page 229. There is a preference for controlling whether the wiper snaps to column boundaries or not. See “Playback and Scrub Wiper” on page 93. 13:39:16 From rpedraza : How do you let them know you want to ask a question 13:39:29 From Glenn Workman : If you need to ask a question: you can open the Participants panel and click the Raise hand button. Adam or Matt will send a request to unmute your mic to ask your question. 13:39:30 From Ray Toler : Is that only for MIDI? 13:39:42 From jraoul : rpedraza — at the BOTTOM of the Participants window 13:39:44 From rpedraza : thanks! 13:39:54 From Dan Wool : Glenn: That turns off Audible Mode….I just want the wiper to not scrub…pretty much ever! 13:40:42 From UltraVioletIdea.com (gReg Silvus) : Adam (or others): Do you have a favorite *average* loudness meter plugin? Is there a built-in MOTU meter? 13:41:22 From Dan Wool : Not being able to turn off Audible Wiper scrubbing is in my top 10 DP complaints 13:42:08 From Adam Goldman : gReg: Long used Izotope’s Insight2, but after JBoylan showed the Nugen plugin, I’ve started using that more. 13:42:10 From Glenn Workman : Someone asked: Audition Volume is a setting in Preferences/Play And Record/Audio Options. 13:42:27 From Charlyn Bernal : Different velocities can trigger different samples within the same sound that make up the patch. 13:42:54 From Adam Goldman : gReg: Nugen’s MasterCheck 13:43:18 From Alle Segretti : Ray, yes the wiper play's midi, but not audio tracks. when editing dialogue I need to wipe back and forth to find a gap, or breath, or chop between voices 13:43:45 From UltraVioletIdea.com (gReg Silvus) : Thanks! So that’ll give me an average, so from project to project I can make sure my levels are pretty consistent? 13:43:46 From thomasknudsen to Glenn Workman (Privately) : When I drag an audio wave file into the tracks window, it inputs fine to the waveform window but how do I get it to print to the sequence window? 13:43:54 From Bob Turner : Switch data (like Controller 64) can also show up in the controller data area by un-checking the Show Only box. 13:43:57 From Adam Goldman : LUFS. 😊 13:43:58 From Paul Lenart : Thanks Glenn 13:44:33 From Timmy Samuel : redrum 13:44:40 From UltraVioletIdea.com (gReg Silvus) : Roger on LUFS 13:44:54 From Adam Goldman : Timmy: The Shining? Danny? 13:45:07 From Adam Goldman : (You feeling ok?) 13:45:50 From Ray Toler : Ultraviolet, I still use eith the iZotope or Waves meters. There are a couple of really useful plugs from meterplugs.com that I use a lot: K-Meter, Dynameter, and Loudness Penalty. 13:46:03 From paul : Matt: do you still add fades to everything during cleanup, just in case? 13:46:04 From Ray Toler : Those were developed by mastering engineer Ian Shepherd. 13:46:43 From jraoul : Adam - Matt was talking about his red drum tracks. 13:46:45 From Glenn Workman to thomasknudsen (Privately) : To do the same thing (drag into) the Sequence Window you have to drag it below existing tracks to make new track for that audio. Is that what you mean? Or if its just not displaying in the Sequence Window you need to see the Track Selector window and make sure that track is highlighted. 13:47:01 From UltraVioletIdea.com (gReg Silvus) : Thanks, Ray. Does waves have the longer-term average? (I have a Waves package, I’ll need to see what I actually have.) 13:47:02 From Adam Goldman : Oh, so maybe I should wonder if Matt feels ok, Jr. 13:47:08 From Adam Goldman : *JR 13:47:12 From Ray Toler : Dynameter, in particular, is really useful once you wrap your head around what it’s actually showing. 13:47:21 From Ray Toler : Yes, it shows long and short term values (Waves) 13:47:26 From Roger Carr : Thanks Adam - gotta go, though... 13:47:27 From Neil McCarroll to Glenn Workman (Privately) : Youlean Loudness Meter - free and worth looking at. 13:47:32 From Neil McCarroll to Glenn Workman (Privately) : ahhhh 13:47:35 From Adam Goldman : Bye Roger 13:47:38 From Glenn Workman to Neil McCarroll (Privately) : Neil - Hi - you and me again. 13:47:45 From Neil McCarroll : Youlean Loudness Meter - free and worth looking at. 13:48:04 From UltraVioletIdea.com (gReg Silvus) : Thanks, Neil. That’s the right price ;-) 13:48:05 From Glenn Workman : Roger: Got your payment, thanks for the donation for Matt’s copy. 13:48:06 From Adam Goldman : Neil/Greg: yes, I pulled a copy of YouLean too 13:48:16 From Adam Goldman : (haven’t really used it much yet, though) 13:48:19 From Neil McCarroll to Glenn Workman (Privately) : what can I say - I’ve missed you buddy!! 😅 13:48:27 From Glenn Workman to Neil McCarroll (Privately) : Much love :) 13:48:31 From Ray Toler : Youlean is also good. I like the display in iZotope insight. There’s also a batch tool I *love* when assembling an album. Let me remind myself of the name... 13:49:21 From David Gottshalk : How do you bounce all your audio tracks down to one track so that it is ready for mastering? 13:49:46 From Glenn Workman : David: Highlight all (Command-A) then Bounce To Disk from the File Menu. 13:50:31 From Ray Toler : Ok, the other two loudness apps I use a lot are “Orban Loudness Meter” and r-128x-gui. The latter will give you a quick offline long-term value of multiple tracks. Both are free, I think. 13:50:34 From Glenn Workman : Steve Sklar: You’re unmuted if you want to ask your question. 13:50:40 From Steve Sklar : i’m not muted. 13:50:56 From Glenn Workman : Steve: We just can’t hear you. Check your mic setting in Zoom. 13:51:06 From Glenn Workman : I can see you’re unmuted. 13:51:08 From Neil McCarroll : YouLean free and good but Insight 2 seems very comprehensive and intuitive if you end up getting it with a bundle. 13:51:14 From UltraVioletIdea.com (gReg Silvus) : Thanks for looking, Ray 13:51:27 From Steve Sklar : Ok, should work now. 13:51:44 From David Gottshalk : OK - thank you 13:51:52 From Adam Goldman : Heard your mic, Steve Sklar. Give Matt a minute to answer this question, then we’ll go to you 13:52:04 From UltraVioletIdea.com (gReg Silvus) : Neil: Agree on Insight 2 from reading a little. $199 seems steep (but probably worth it). Is there a package from them that you like? 13:52:05 From Ray Toler : Ultra, the r128x app is really nice when you have a group of tracks (e.g., album) and want to see if they’re all reasonably close to each other. 13:52:10 From Steve Sklar : Thanks, Adam. 13:52:35 From Ray Toler : I’d say I’m 70/30, though with iZotope Insight and WLM Plus. 13:52:40 From Nozomi Takasu : @Neil Wow Groove3 seems to have great videos. Do you know which category RX would belong? 13:52:42 From Ray Toler : The others are nice for spot checking. 13:53:11 From Terry Leigh Britton : Drum Editor permits naming program changes, doesn't it? 13:53:29 From Terry Leigh Britton : Or is that only notes it lets you name? 13:53:30 From Jose Gonzalez Palma : Bradley that burger mannn..I’m salivating over here :D 13:54:00 From Warren McRae : @Adam.. he’s asking how to make a template for his Roland TR-808 13:54:03 From Tim Valkenburg : Roland TR-8 is very basic…. I think it only sends all tracks at once or nothing 13:54:05 From Ray Toler : Which Roland device is rpedreza asking about? 13:54:20 From Adam Goldman : Warren: either a template, or a clipping. 😉 13:54:23 From Ray Toler : Tim, you can get discrete tracks over USB. 13:54:29 From UltraVioletIdea.com (gReg Silvus) : Adam/Ray/Neil: Thanks for giving me plenty to digest 13:54:30 From Tim Valkenburg : I thought he said TR-8 13:54:43 From Adam Goldman : Robert Camacho: your mic was working just now. We’ll come back to you 13:55:07 From Ray Toler : Ok, yeah, I currently have my TR-8 as an aggregate audio device with my AVBs. Each channel comes in individually, as well as a mix track. 13:55:19 From thomasknudsen to Glenn Workman (Privately) : Same outcome: I drag or import the wav file into the right place and a track is added but the audio is only seen in the waveform window 13:55:19 From Glenn Workman : https://www.roland.com/global/products/tr-8/ 13:55:41 From Ray Toler : With drum machines, I normally record in a single track, then explode those out with Split MIDI notes. 13:55:47 From M &M : thank would be great to name patches in DP, with old midi gear. 13:55:57 From Neil McCarroll : Ultra - I bought ProductionSuite 3 a few months ago at a big discount from pluginboutique.com Version 4 is about to drop 13:56:27 From Glenn Workman to thomasknudsen (Privately) : You can see the track name in both windows, but only see the audio waveform in the Tracks window, not the Sequence window? 13:56:27 From M &M : cherry picker was great. 13:56:33 From Ray Toler : M&M Totally doable, just takes some XML wrangling. I’ve created new patch lists for some of my “missing” gear like the Fantom XR. 13:56:53 From Bob Turner : Gotta scoot. Ya'll have a Great weekend. Thanks Matt, Glenn, Adam. See ya Tuesday. 13:57:00 From Neil McCarroll : Nozomi - you can filter the videos by manufacturer - use ‘Izotope’. Lots on YouTube too for free. 13:57:01 From Glenn Workman : Bye Bob. 13:57:04 From Adam Goldman : Bye, Bob 13:57:09 From thomasknudsen to Glenn Workman (Privately) : Yes. I did exactly as Matt showed. I am on DP10 and Catalina 13:57:10 From Bob Turner : Bye! 13:58:06 From Glenn Workman to thomasknudsen (Privately) : Is it possible the audio is time stamped and is on that track in the Sequence window, but automatically moved to a different time? 13:58:18 From M &M : Ray - can you great your own custom list? 13:58:18 From UltraVioletIdea.com (gReg Silvus) : M&M: really liked cherry picker, too. Was using that back in the day with my Roland SC-33, then the XV-5050 13:58:19 From Glenn Workman to thomasknudsen (Privately) : If you want to show me during the After Party we can see it there. 13:58:52 From Glenn Workman : M&M: Yes you can create your own for external hardware MIDI devices 13:59:00 From Ray Toler : M&M, yep. It’s not a *fun* process (unless you like typing) but if you have a standard list you don’t change much, it’s really nice once you put the effort in. 13:59:20 From Tim Valkenburg : Thanks Ray…I have one….but haven’t used the USB for a while…I’ll have another look…I remember it was pretty basic….thanks for that 13:59:29 From M &M : hey thanks guys. 13:59:32 From UltraVioletIdea.com (gReg Silvus) : M&M/Ray: Agree. You can also copy existing XML files, that turn it more into an editing experience, than a creating experience 13:59:43 From Ray Toler : It’s best if you can find one of the old patch lists from a similar piece of gear and then do a search/replace type thing in a program like BBEdit or TextWrangler. 13:59:47 From jraoul : Steve - tx for that question! 14:00:00 From Ray Toler : Tim, be sure to update to the latest OS. They fixed a lot of the early oversights. 14:00:07 From Nozomi Takasu : @Neil thank you! I’ll do the free-trial :) 14:00:59 From Ray Toler : Honestly, getting the multi-out over USB gave my TR-8 a new lease on life in my studio. I love the device, but was avoiding it because it was such a pain to get breakouts recorded. Now it’s all done in a single pass! 14:00:59 From Neil McCarroll : @Nozomi - brilliant idea! 14:01:20 From paul : You can try trashing the preference files and doing it again 14:01:31 From paul : sometimes this works 14:01:39 From kennethpage : Got a Gig, Gotta’ Go. Adam, thanks for the demonstration. I’m sold. 14:01:44 From thomasknudsen to Glenn Workman (Privately) : Not that I can see, Glenn. The track will play from the waveform window if I import it as a soundbite, but still not visible in the other windows 14:01:55 From Tim Valkenburg : Sweeet….cheers Ray…. will have another look…best to you 14:02:30 From UltraVioletIdea.com (gReg Silvus) : M&M: https://duc.avid.com/showthread.php?t=123172 https://digicake.com/midnams/ 14:02:34 From Ray Toler : Polyphony count: “lots” 14:02:40 From Adam Goldman : Bye Kenneth! 14:02:53 From Adam Goldman : what Ray said. 😊 14:02:56 From UltraVioletIdea.com (gReg Silvus) : M&M: Those sites have references to Fantom XR midnams, they might make a good starting point for editing 14:03:11 From Glenn Workman to thomasknudsen (Privately) : Are you sure its highlighted in the Track Selector for the other windows? 14:03:42 From UltraVioletIdea.com (gReg Silvus) : M&M: Looks like I might have misinterpreted what you were after. I see that you said that you have already created that one. Sorry 14:04:14 From Steve Sklar : Gotta go, all. Have a great weekend! 14:04:21 From Adam Goldman : Bye, Steve 14:04:38 From Ray Toler : M&M, another thing you have to make sure you edit is the .MIDDEV file. If the gear isn’t contained there, it won’t show up, even if there’s a midnam file. The Fantom XR wasn’t included for a really long time. Or rather, it was, but it didn’t have definitions for expansion cards. I’ll be happy to send you my customized Roland patchname folder if you’d find that helpful. 14:06:08 From M &M : ultra/ray: thanks...lots of work but I'll do it f ou r those voice names. 14:06:11 From Zab Skornik : Thank you all . Late here ! Happy WE 14:06:16 From Caxa : @Whoever asked the Akai Controller question… Just checked with my MPK and the midi learn settings were saved no problem. 14:07:00 From Adam Goldman : Russ: Say hi to Analog Andy for us. 14:07:13 From Bradley DePasse : It’s got that nice Juno 106 look to it! 14:07:18 From Glenn Workman : Zab - same to you. 14:08:08 From thomasknudsen to Glenn Workman (Privately) : You can see it labeled but cannot run it or see anything printed. Only waveform window but it doesn’t run. 14:08:13 From Adam Goldman : THE BURGER IS EATING BRADLEY!!! 14:08:21 From Ray Toler : I saw that, Adam! 14:08:24 From Adam Goldman : It’s a blancmange!!!! 14:09:00 From Bradley DePasse : Adam: I just screen captured it in QuickTime and edited as perfect loop! 14:09:21 From Glenn Workman to thomasknudsen (Privately) : If you want to sign on about 10 minutes after this with Zoom I can check it out: MOTU After Party ™ 495 946 0805
863769 14:09:22 From Adam Goldman : Bradley…don’t look now, but you might have a little too much time on your hands 14:09:22 From Bradley DePasse : I was looking for a hot tub clip! 14:09:31 From Bradley DePasse : lol 14:09:48 From Björn Lindén : Buffers ? 14:10:04 From Maria Eugenia Leon : when I want to add a new take in the midi tracks, and I want to add a new track to all my tracks within one group… how do you do that? 14:10:16 From James Paschall : LOL, Gentlemen! 14:10:30 From M &M : freezing the track shouldn't really matter for ram? 14:10:47 From Glenn Workman : Maria: Groups have settings that include New Take etc. 14:10:47 From Ray Toler : My processor goes back and forth between laughing at me and accusing me of assault & battery. 14:11:02 From Neil McCarroll : I really love seeing these real world problems being sorted - the webinars and you gurus rock! 14:11:12 From thomasknudsen to Glenn Workman (Privately) : Okay, I’ll do that … thanks 14:11:21 From darrellsmith : After party? 14:11:25 From Maria Eugenia Leon : how do I access the group settings? 14:12:03 From James Paschall : +1, Neil. See it, say it, sort it. 14:12:23 From Dan Wool : I lost my Save reflex since AutoSave showers up 14:12:27 From M &M : every hour,how about every 30 seconds. 14:12:28 From Glenn Workman : Maria: When you create group a window appears there you can turn on/off Lock Track, Add Take, Switch Take, Rename Take etc. 14:12:40 From darrellsmith : Do the save ases have a max cpu footprint? 14:12:45 From Ray Toler : I lost my save reflex in 9.52. I got it back in 10. 14:12:47 From darrellsmith : Not asses? 14:13:22 From Ray Toler : Not sure I understand the question, Darrell? 14:13:25 From Glenn Workman : Maria: To change an existing group. double -click in the Type column to change settings. 14:13:39 From Maria Eugenia Leon : Glenn: thanks, I still don’t see any window appearing… 14:13:53 From John Boyle : @Adam, I came to your demo a little late. So good that I am seriously thinking about it. Question, I have a track pad on my Mac Book Pro. Should Audio Swift work with that? 14:13:56 From Tim Valkenburg : Yes why are the YouTube replays not available quicker….3 months??…. I’m happy to pay for them 14:14:04 From darrellsmith : Does the save as take up alot of room on the drive? 14:14:08 From Adam Goldman : JohnB: I believe it will 14:14:11 From Russ Pfeifer : See ya guys next week - Cheers! 14:14:14 From Dan Wool : +1 It’s a little irritating that the videos aren’t showing up 14:14:17 From John Boyle : @Adam thanks 14:14:17 From Adam Goldman : Bye SauRus 14:14:25 From Warren McRae : Darrell: No not at all 14:14:38 From Ray Toler : I bet there are some underworked video editors in the group that would be happy to help out… ;-) 14:14:39 From Glenn Workman : Maria: Highlight several track names in the Tracks Window. New Track Group (command-shift-G) and the window should appear. 14:14:45 From darrellsmith : Thanks Warren. Happy BIRTHDAY warren! 14:14:45 From Tim Valkenburg : I’m at the other end of the world and hard to catch these real time 14:14:57 From Warren McRae : Darrell: keep them in the same folder as the project 14:14:58 From Ray Toler : Happy birthday, Warren! 14:15:04 From Dan Wool : Move the Zoom one up….before the lockdown ends 14:15:07 From Neil McCarroll : Happy Birthday Warren! 14:15:09 From Warren McRae : Thanx Darrel!!! 14:15:09 From Alle Segretti : You can. always ask Matt a question and throw him into repeating a skill and a new webinar :) 14:15:11 From Ray Toler : CLIPS CLIPS CLIPS CLIPS CLIPS 14:15:11 From Caxa : Could the unedited videos be posted to a private MOTUnity webpage? 14:15:15 From john mazzei : Yes! The interviews can be prioritized! That would be great! Terence Blanchard #1! Ha Ha! 14:15:22 From darrellsmith : Warren: Yea I keep them in the folder 14:15:22 From Warren McRae : Thanx Ya’ll ! 14:15:29 From Barry Nelson : How can you move a project from Performer Lite to DP10? 14:15:41 From Glenn Workman : Barry: They will open from the File menu in DP. 14:15:50 From Warren McRae : Darrell: Yeah that’s the best way to do it 14:16:17 From Ray Toler : I can answer that question, Sean. 14:16:22 From darrellsmith : We touched on this subject in the after party session 14:16:22 From Ray Toler : They directly addressed it. 14:16:24 From Barry Nelson : Thanks. So obvious. 14:16:29 From Caxa : @Ray me too 14:16:35 From Nozomi Takasu : @john agree! 14:16:44 From Maria Eugenia Leon : Glenn: Thanks!!!!! found it 14:16:45 From Tim Valkenburg : I’d love a subscription plan that injects more money into DP R&D 14:17:00 From john mazzei : It seems like Spitfire would have DP templates given they are so oriented to film scoring. 14:17:01 From UltraVioletIdea.com (gReg Silvus) : I’m partial to red-headed DAWs 14:17:11 From Ray Toler : They only wanted to release templates for DAWs that they had expertise in (Logic and Cubase). All of the others have been done by volunteers. I will be submitting my template to them as soon as I get a walkthrough video done. 14:17:27 From Glenn Workman : DP/MOTU needs an evangelist team that reaches out to all these companies to establish connections and even help with templates etc. 14:17:31 From Mitch Chakour : DP ROCKS!!! 14:17:34 From darrellsmith : I sent an email to Spitfire 14:17:36 From Ray Toler : John, nobody at Spitfire is currently using DP as their primary. Christian used to use it, but moved to Cubase and Logic. 14:17:38 From Neil McCarroll : Hell yeah Matt!! 14:17:47 From Tim Valkenburg : I know many are reluctant to consider a subscription….but I’m in…. 14:18:16 From Victor LeComer : Was the original performer actually released in 1984 or 1985? 14:18:17 From Dan Wool : If Matt had more tattoos DP would be more popular probably 14:18:17 From chris : Yeah glenn an evangelist team would be great 14:18:44 From jraoul : “Good afternoon, sir or madam. Have you heard the word about Digital Performer?” 14:18:50 From john mazzei : Yeah I get that they don’t use it but I bet a lot of their customers do. 14:18:59 From Adam Goldman : JR: go door-to-door with that. 😊 14:18:59 From Glenn Workman : chris: Not sure if you or anyone else would remember Guy Kawasaki from Apple. His “job” was simply to promote the Mac anywhere possible. 14:19:10 From Glenn Workman : jraoul: ) 14:19:16 From Ray Toler : Again, I’ll be sending my DP template for BBCSO in as soon as I’ve finished stress testing it, but if anyone wants to kick the tires in advance, here’s the download link: 14:19:17 From Björn Lindén : Met Guy once.. 14:19:18 From Ray Toler : https://www.dropbox.com/s/mi44r580h8s54ni/BBCSO%20Digital%20Performer%20Template.zip?dl=1 14:19:19 From chris : I do remember and that is exactly what I was thinking 14:19:20 From Alle Segretti : yes but A%ID is a four letter word. and I find a^id products cumbersome. SoundTrack pro was good then apple pushed over to stupid garage band and Logic (or is it protools?? both frustrate me) So I kinda had no choice to switch to DP, hence upgrading from 5 to 10, and creating new workflow. 14:19:23 From Aaron Evans : I appreciate the overview.. haven’t used Performer since I had the non digital version in the 90’s… now I’ve decided to get back into it I’m all set to the newest DP software. May be off topic but what is a good MOTU audio interface… I’m thinking in the studio to semi pro category? 14:19:33 From Maria Eugenia Leon : I have to go, thanks guys 14:19:34 From Brian : Just on Spitfire and DP. I was at a Spitfire event in London in February 2020. The participants gave a show of hands about the DAWs that they use. Not one hand went up for DP! 14:19:41 From James Paschall : Thanks, Matt, Glenn, Adam, Ray, Russ, Bradley, Darrell, et. al. These sessions are gold! DP is the best! 14:19:58 From Reed Robins : Daniel Paul!!! 14:20:04 From Alle Segretti : Other than audio scrubing with wiper absence, DP is everything in one place with so far nothing external I need. 14:20:09 From Sean Martin : That is amazing on the Spitfire side 14:20:26 From Sean Martin : DP is the go to for film scoring 14:20:28 From James Paschall : +1, Alle 14:20:47 From Alle Segretti : Brian, probably because people buy X software and Y hardware, whereas Motu is both. 14:20:50 From Adam Goldman : Bradley: taking a little bit of the lettuce? Pickles? Mustard? 14:20:54 From Aaron Evans : to go with new model MacBook pro with usb C style ports. 14:20:56 From Glenn Workman : Daniel Paul: I do individual training (or group training) if you like. 14:20:58 From John Boyle : Thanks to all the good people here who make this plane not just fly, but soar. Have a good weekend all. 14:21:04 From Tim Valkenburg : I’ve sincerely been thinking… as a long-time DP evangilist…. Wouldn’t more financial input to such a great app help its development? wouldn’t a subscription plan help finance this? please 14:21:04 From Glenn Workman : glenn@freqsound.com 14:21:22 From Adam Goldman : Onions. Must have been the onions 14:21:29 From Alle Segretti : Sean, DP need audio wiper for film dialogue :). That's where other daws have one tiny plus, with endless minuses. 14:21:40 From Glenn Workman : At any time you can save the chat by clicking on the 3 dot bubble that is in the Chat typing field 14:21:50 From Sean Martin : DP rules all the others drool 14:22:07 From Ray Toler : Split notes. 14:22:07 From Bradley DePasse : Gotta run, Thanks Adam, Matt, Glenn and All DP Tribe Members! Don’t forget it’s national Cheeseburger Day today!! One-Day App Deal $.50 Double Cheeseburger?* Aww Yeah. Celebrate National Cheeseburger Day—and make it a double with this App-exclusive deal. Order in the App and select Drive Thru or Curbside pickup. 14:22:08 From Alle Segretti : I've been syncing ADR and location sound to camera sound visually the last two days. It's faster with audio wiper, but I'll survive. 14:22:16 From Glenn Workman : Bye Bradley. 14:22:31 From James Paschall : “I have always thought in the back of my mind, cheese and onions” The Rutles 14:22:38 From jraoul : Adam — I’m going to go door-to-door with MIDI tracts. 14:22:43 From Glenn Workman : Goosestep Mama! 14:23:04 From Ray Toler : I use split notes to do both splits and merges. Only thing that gets hinky is when you have overlapping controllers. 14:23:21 From Tim Valkenburg : I have a number of plug-in plans….PlugIn Alliance, I buy UAD plugs, Antsres….bundles, plans, subs…. Compared to all these DP is MUCH more valuable…yet so much cheaper over the years….Please charge us more….$250 per year? Yes 14:23:39 From john mazzei : Adam beat me to it! Exactly how to do it in the MIDI edit window. 14:23:49 From Alle Segretti : Tim, I don't believe a subscription process would assist. I don't do subscriptions, I do purchase outright when I need to. many people do. and Motu doesn't need people calling up 3 years later demanding 2 years refund cause they didn't use any subscription but forgot to cancel the monthly charge. it's a massive issue with Adobe three days. 14:23:54 From Ray Toler : I’m a huge DP evangelist, but if they go subscription, I’m out. 14:24:08 From Wayne Pronzati : I gotta run but thank you Matt, Glenn and especially Adam for making me have to go out and buy a trackpad! Have a great weekend everyone! 14:24:10 From Ray Toler : Or rather, if they go subscription-ONLY. I’m out. 14:24:10 From Charlyn Bernal : Glenn, if I want to get some lessons from you, what’s the best way to contact you. I think we are friends on FB - I could message you? 14:24:23 From Björn Lindén : @Ray: yeah, me too… 14:24:24 From Sean Martin : agreed no subscriptions for DP 14:24:25 From Neil McCarroll : Alle - maybe absorb the pain and sync in FCPX then export back to DP? 14:24:34 From john mazzei : Gotta go. Thanks everyone! 14:24:36 From Björn Lindén : Or both.. 14:24:38 From jraoul : Tim - you could always send MOTU donations. 14:24:46 From Glenn Workman : Email is always best for me, I can’t search text in FB messenger etc. glenn@freqsound.com 14:25:06 From Charlyn Bernal : Glenn, great thank you! 14:25:19 From Alle Segretti : Niel, I don't have FCPX and won't be looking that way. I'm buzzed with Davinci Resolve. just wish DP and Resolve would talk to each other :) 14:25:26 From Ray Toler : I only subscribe to services. Not tools for production. The exception is if it’s something so expensive or rarely used that I would never buy it (e.g., a back-hoe, or a vintage Neumann mic.) 14:25:37 From Dan Wool : I have a Search setup for velocities… for this reason 14:26:31 From darrellsmith : Bradley, I want a cheeseburger. Thanks alot my friend. 14:26:35 From Glenn Workman : Love the English majors that wrote the Split Notes screen. How many know criteria was plural and criterion was singular. 14:26:44 From darrellsmith : The subliminal messaging really worked. 14:26:51 From Ray Toler : Bradley in single-handedly responsible for the spike in burger sales today. 14:26:55 From Dan Wool : Could move Key Switches to their own track with Split Notes! 14:27:06 From Tim Valkenburg : OR we could all pay more for something we love to keep it kicking no? 14:27:30 From Glenn Workman : Tim: You can always buy more interfaces :) 14:27:46 From Adam Goldman : It’s like a roach motel. VI’s move in, but they can’t move out. 14:27:48 From Tim Valkenburg : LOL yes…. I’ve already done that ( : 14:27:55 From Alle Segretti : Tim, paying more means being paid more, and I struggle to get people to pay me that last ten years as it is. 14:27:59 From darrellsmith : Good one Adam. 14:28:20 From Adam Goldman : 😊 14:28:22 From Neil McCarroll : Hate to say it, but more innovative marketing doesn’t have to cost more money... 14:28:26 From Ray Toler : Tim, you could buy gift copies of DP for young folks who are making Ableton of Logic videos on Youtube… 14:28:50 From Glenn Workman : I never Compact while a project is in progress. Always copy the entire project to another location before I delete and Compact. 14:29:12 From Tim Valkenburg : I have to say that IMHO thee Webinars of Matt’s are a great boost to the accessibility of DP….thanks so much Matt 14:29:14 From Ray Toler : I am so paranoid about the Compact function… 14:29:23 From Ray Toler : +100, Tim. 14:29:37 From Ray Toler : This kind of outreach is the kind of marketing they need to focus on. 14:29:45 From Tim Valkenburg : Yes Ray 14:29:46 From Sean Martin : @Tim V Totally agree 14:29:47 From Ray Toler : Work the algorithm! 14:29:51 From Neil McCarroll : +1000 Tim - they came along at a perfect time for me 14:29:53 From Alle Segretti : The issue with Logic and ProTools users is religion. I'm not Motu religious, I'll use what works and works well. AVID have shocking customer support and don't uptake suggestions. Apple threw their professional tools inert the bus with FCPX, and Adobe are just too expensive to subscribe and require non mobile bandwidth or super high speed data for our access. 14:29:57 From David Gottshalk : Buy everyone 14:29:59 From Tim Valkenburg : We’ve lived in the shadows so long….too long 14:30:29 From jraoul : Hey quick survey: Do any of you see Undo files or folders INSIDE your Audio Files folder? I have an Undo folder as well, but for some reason some Undo files show up in Audio Files 14:31:02 From Alle Segretti : Not all of us live on a 10TB fibre cable next door to a data center ... especially in Australia where I'm on the edge of a 4G network that sometimes works and NBN which is our super highest broadband is 4G for far too many people. 14:31:07 From Neil McCarroll : David - I can’t afford everyone lol! 14:31:07 From Dan Wool : jraoul: never seen this 14:31:22 From Ray Toler : Jraoul, I don’t see them in any of my current projects. An errant drag/copy maybe? 14:31:37 From jraoul : Nope — the project generates them without my doing anything 14:31:53 From Alle Segretti : I just want to see more women taking up DP, rather than fearing they can't use it and play with useless free tools that are best for 8 year old kids. 14:31:53 From Ray Toler : Weird. 14:31:56 From jraoul : It stumped MOTU Tech, too — they think it might be a cause for some repeated crashes 14:32:03 From Gregg Seibert : Bank changes usually require the MIDI instrument to be set up to use controller 32 as a bank change. I think that happen in Audio Midi setup 14:32:22 From Tim Valkenburg : DP gets overlooked and unfairly panned so much….no one really knows unlesss you’ve spent quality time with DP….and if you have, you may well end up a huge fan….like I am…we are…It’s just been so hard to shine a light on DP for others 14:32:43 From Ray Toler : Tim, just keep the faith and post in the forums. :-) 14:33:09 From John Flaherty : Got to run. Thanks, all! 14:33:25 From James Paschall : Cheers, John. 14:33:28 From Ray Toler : (And not just the DP-specific forums… :-) 14:33:33 From Neil McCarroll : bye John 14:33:39 From Tim Valkenburg : Thanks Ray….don’t worry…I shout it out as best I can…I’m in the forums…. thanks to you and all 14:33:47 From John Flaherty : Sorry I’ll miss the after party! 14:34:00 From Victor LeComer : Ding??? 14:34:14 From jraoul : Yes, Victor: Ding. 14:34:27 From Reed Robins : Heal separation 14:34:36 From Reed Robins : Option H 14:34:53 From Glenn Workman : MOTU After Party ™ today for those interested - about 10 minutes after this webinar ends. 495 946 0805
863769 14:35:25 From jraoul : Select the first segment of the soundfile and extend the ending as far right as it will go. Or click on the filename up above and choose the version that doesn’t have a .x at the end. 14:35:28 From Adam Goldman : Thanks, everyone 14:35:31 From Adam Goldman : have a great weekend