12:49:30 From Jay Farber : Restart ehe Computer 12:49:36 From Jay Farber : And maybe the modem 12:49:45 From Timmy Samuel : And the world 12:49:46 From Thomas : ok thanks a bunch I'll try that after this webinar. I appreciate the replies 12:49:57 From Jose Gonzalez Palma : reset the world lol Timmy 12:50:06 From Jose Gonzalez Palma : +1 12:50:20 From Adam Goldman : Thomas, alternatively, if you send everything in your mix to a bus you can create an Aux track with that same buss as the input, and then you’ll have that Aux with fader and inserts/sends available. 12:51:06 From Thomas : ok thanks for the info. You guys are awesome just like the Motu support team 12:51:07 From Adam Goldman : (in mixer window) 12:52:30 From Adam Goldman : DaveH: Zoom outages map: https://downdetector.com/status/zoom/map/ 12:52:47 From Workman, Glenn M. : The Zoom episode for Mythic Quest on Apple TV+ was decent. I think the first of that type released. 12:55:21 From Jay Farber : What is the left controler? 12:55:33 From Adam Goldman : with blue knobs…is a speaker output 12:55:40 From Jay Farber : Thanks 12:55:41 From Adam Goldman : controls his monitors level 12:55:42 From Ray Toler : Jay, if it’s the thing with the blue knob, that’s a Presonus Central Station remote unit. Monitors. 12:55:52 From MikeyJ : LOL people worry about putting a cell phone up to your head..... he's surrounded. 12:56:23 From Ray Toler : QUESTION: Is he driving all four monitors off one computer, including the video? If so, what vid card is he running? 12:56:31 From Adam Goldman : Jay: this: https://www.presonus.com/products/central-station-plus 12:56:54 From Jay Farber : thanks 12:57:04 From Timmy Samuel : All he needs is a mini fridge and a hotplate 12:57:20 From Alle Segretti : you don't have to leave ... it's that a choice or captive? 12:57:22 From Workman, Glenn M. : Timmy: I think that was over on the counter near the door. 12:57:32 From Adam Goldman : Alle: :-) 12:57:33 From Timmy Samuel : ;-P 12:59:17 From Dan Wool : I love the studio tours like he did 12:59:44 From Workman, Glenn M. : Dan: Agreed. 12:59:52 From Workman, Glenn M. : Nice to see how people work. 13:00:00 From Ray Toler : +1 13:00:03 From Adam Goldman : buncha gear junkies 13:00:04 From Adam Goldman : :-) 13:00:21 From kennethpage : Always have been Adam 13:00:23 From Jose Gonzalez Palma : Screenshot galore :) 13:00:42 From Adam Goldman : always WILL BE, Kenneth. :-) (Once a gear junkie, always a gear junkie) 13:00:50 From kennethpage : Yes 13:01:12 From kennethpage : Mostly Software now 13:01:34 From Alle Segretti : glad we don't have any prisons in this meeting, gear junkies ... oiy vey!! 13:02:17 From Workman, Glenn M. : Don’t even try - total disappointment :) 13:03:23 From Alle Segretti : hey he's ahead of me, I upgraded from dp5 to DP10 this year :) 13:03:37 From kennethpage : Good move Alle 13:03:38 From Eduardo Valenzuela - Chile : Wou… 13:04:08 From Ray Toler : As long as MOTU is in charge... 13:04:12 From jraoul : Mo Tools 13:04:17 From Adam Goldman : RAY!!! 13:04:21 From darrellsmith : Adam: When? 13:04:26 From Ray Toler : But Avid Digital Performer will be the version that sends me somewhere else. 13:04:27 From Alle Segretti : avid is a four letter word ... 13:04:28 From Adam Goldman : Now? 13:04:42 From Adam Goldman : (when what exactly?) 13:04:43 From darrellsmith : Adam: DP uddate 13:04:52 From Bob Turner : I gotta go. Vocalist is here! See ya tomorrow. Be Safe! 13:04:54 From darrellsmith : update 13:04:56 From Adam Goldman : oh, yeah….THAT 13:04:59 From Workman, Glenn M. : Bye Bob. 13:05:19 From Adam Goldman : update, Darrell, in place of the MOTU/Avid merge, please 13:05:19 From On my iPad : ProTools = Their Rules :( 13:05:23 From Ken Thies : I worked on DP starting with 4.6 I think it was, first one I owned was 5, but I've had each version from there on. 5 to 10 is a HUGE jump in capabilities... 13:05:46 From Jay Farber : 1.0 13:06:13 From Alle Segretti : is it just me or is the screen share really blocky?? 13:06:21 From Jay Farber : yes 13:06:27 From Ken Thies : Not Avid Digital Performer, MOTU protools.... ;-) 13:06:32 From Benoit Widemann : This version looks ultimate enough :) 13:06:35 From Ray Toler : It’s not super-crisp, but everything’s legible. 13:06:53 From Adam Goldman : Imagining it’s a resolution thing on his side 13:07:17 From Adam Goldman : (fully enhanced/messed up by the friendly folks at Zoom.) 13:07:21 From TapLoudCmdrFunk_mic : MOTUols? 13:07:21 From Workman, Glenn M. : That’s his far left monitor, that’s where his head is turning. 13:07:58 From kennethpage : MOTU No Tools 13:08:17 From Adam Goldman : Kenneth: NoTUls? 13:08:27 From kennethpage : yes 13:08:30 From Alle Segretti : ok. just came clear. maybe it inhaled smoke 13:08:47 From kennethpage : My view is fine 13:08:48 From Adam Goldman : Alle, our friends at Zoom, most def 13:09:59 From Benoit Widemann : Let’s continue Motuning 13:10:00 From Jose Gonzalez Palma : The Newmans are so cool, all of them so open and sharing about their work and process. 13:10:07 From Björn Lindén : Alle: temporary bandwidth issue…somewhere… 13:10:20 From Ray Toler : “I need this to be different, but don’t change anything." 13:10:22 From Adam Goldman : Benoit!! 13:10:24 From Jose Gonzalez Palma : Thanks for bringing him in Matt 13:11:15 From Workman, Glenn M. : Ray: Exactly. The same people will keep changing their video edits for timing, have blank spaces that say “graphics go here” etc. and expect you to score for an unknown length to no picture. 13:11:48 From Ray Toler : It’s fine here. 13:11:58 From kennethpage : fine here 13:12:46 From Ray Toler : Hooray for Stylus!! 13:13:32 From Ray Toler : Seeing his template just made something click for me… figured out how to fix something in my own that’s been bugging me. 13:13:50 From Adam Goldman : Squash the bugs, Ray. :-) 13:14:45 From paul : that’s a lot of chunks. how long does it take to load? 13:15:22 From Ray Toler : Paul, I suspect it’s pretty quick once the v-rack is loaded. 13:15:40 From Victor LeComer : QuickKlicker?? 13:15:41 From Ray Toler : Faster if he’s using something like VEP to offload to other machines. 13:15:43 From Adam Goldman : Ray/Paul: plus, as he said, he hosts sounds on other machines 13:15:54 From TapLoudCmdrFunk_mic : Glenn/Adam: Can you ask to see his 828es I/O routing matrix from the ProAudio control? 13:15:56 From Adam Goldman : (What Ray said.) 13:16:02 From Ray Toler : (What Adam said.) 13:16:12 From Workman, Glenn M. : TLCF: Will do when we have a chance. 13:16:22 From TapLoudCmdrFunk_mic : Thanks! 13:18:18 From Dan Wool : That’s great idea for a Keyboard Maestro command 13:18:31 From Ray Toler : Ok, that was a KM macro to rename? 13:18:38 From Adam Goldman : Ray: yes 13:18:43 From Ray Toler : Thanks. 13:18:44 From Francesco de Donatis : We can’t see the screen it is totally blurred 13:18:46 From Ray Toler : Missed that bit. 13:18:49 From Workman, Glenn M. : Ray: Yes. 13:18:56 From Dan Wool : To add to the name in the tracks….I do this a lot 13:18:57 From Adam Goldman : Ray: what Glenn said. 13:18:58 From Workman, Glenn M. : Keyboard Maestro 13:19:02 From edshearmur : This is an area where DP is still way behind Cubase. Offline bounce and rename is SO flexible in Cubase 13:19:31 From Dan Wool : I just got KM the other day…looking for ideas 13:19:47 From Jay Farber : Anything built could be shared for KM 13:21:28 From Ray Toler : Darrell, I tried my best, but succumbed to the Aparillo plug we saw on Tuesday. 13:22:07 From darrellsmith : Ray: All good 13:22:34 From Adam Goldman : A true Broke-inar ™ 13:22:39 From Ray Toler : (It’s very cool - gave me a lot of ideas for the score I’m working on) 13:23:46 From Thomas : I like the idea of using 2 PC's. What are some of the advantages of using 2 PC's? 13:23:51 From Dan Wool : A Q for Joey: Why PCs? Just for the cost, or another reason? 13:24:41 From Workman, Glenn M. : Thomas: He’s using Vienna Ensemble Pro to host Virtual Instruments on the other computers. They handle a lot of the heavy computer lifting and take that load off DP. 13:25:26 From Thomas : oh I see. That makes sense. Thanks for the reply 13:25:28 From Workman, Glenn M. : Dan: We’ve have folks on who’ve used either Macs or PC for the same things. Personal preference I would guess. One guest used Macs just because he said he hated PCs. 13:26:26 From Dan Wool : I know….the “preference” has always been because of the cost. 13:26:51 From Charlyn Bernal : I think the PC’s started when we had to get Giga studios and Snuffy’s but they stopped supporting 13:27:16 From Workman, Glenn M. : Dan: By the time you get powerful enough machines even the cost difference becomes minimal. 13:27:28 From Ray Toler : Bandwidth stuff again. 13:27:34 From Gregg Seibert : Sounds fine here 13:27:36 From Ronnie Lawson : audio is clean here 13:27:45 From Björn Lindén : Still OK here… 13:27:48 From kennethpage : sounds fine here too 13:28:02 From Alle Segretti : I'm not getting Audio breakup. but the screen share is fuzzing, video is fine. 13:28:08 From Reed Robins : Im hearing things fine . 13:28:14 From kennethpage : I hear it now 13:28:15 From Eric Chapelle : screen share is fuzzy here too 13:28:20 From Ronnie Lawson : can he zoom in a bit more on his template? 13:28:40 From Dan Wool : Right…I’m wondering if it’s just the cost, or another reason. …I can’t imagine why anyone would prefer a PC 13:28:44 From Eric Chapelle : Yes, to zoom in deeper in te template. 13:29:15 From John Flaherty : Sounds like someone’s eating potato chips. 13:29:55 From Ken Thies : Dan: personally, I'm with you re mac over pc; but I've talked with many others who are totally opposite. 13:31:35 From Workman, Glenn M. : Neumann vs. Newman - go! 13:31:40 From Dan Wool : Ken: I know. It can be quite a loaded subject 13:31:51 From Ken Thies : Dan: :-) 13:32:07 From kennethpage : Alfred E. Neumann 13:32:11 From Adam Goldman : Dan/Ken…only fully loaded if Caxa & Ray are dueling over plugs 13:32:25 From Workman, Glenn M. : Dan: For me I just wouldn’t want to have to deal with yet another different OS and its quirks. There’s computer info I’d like to be able to forget from the past 30 years. 13:32:29 From Ray Toler : No duel here. 13:32:30 From Adam Goldman : Glenn/Kenneth: What U87 worry? 13:32:41 From Workman, Glenn M. : :) 13:33:43 From Dan Wool : Glenn: Yes. Just two Mac systems would be plenty. 13:33:49 From Ray Toler : Nope 13:34:32 From Bradley DePasse : You have to share computer audio in Zoom share settings 13:34:47 From Ken Thies : Anyone else getting an occasional popping, like an old pulse-dial phone? Usually while people are speaking. 13:35:01 From darrellsmith : Brad for the win! 13:35:10 From Ray Toler : Ken, yeah… sounds like a robot eating chips. 13:35:21 From Bradley DePasse : It shows just before you select the share 13:35:43 From darrellsmith : Yeah, a gremlin is eating chips. 13:36:14 From Ken Thies : Not the scrapy sound, but a pop-pop-pop during speaking. I'm wondering if it's my hack-job of passing zoom through a limiter in DP before sending to speakers... 13:37:20 From Ray Toler : I’m not getting that sound, Ken. 13:37:40 From Benoit Widemann : Make DP send directly to Loopback? 13:38:21 From Garry Norman : How about audio set up … is the loopback the second driver 13:38:38 From Jay Farber : Yamaha glitch 13:38:42 From Ray Toler : Listening to Joey troubleshoot is like listening to my own internal monologue most days. 13:38:46 From kennethpage : Actually, this trouble shooting is very informative 13:38:55 From TapLoudCmdrFunk_mic : "Have you tried turning it off and on again?" 13:39:05 From TapLoudCmdrFunk_mic : Kenneth: Agreed 13:39:06 From Ken Thies : I've got quite a fan-dangled jury-rig going on here since my mix console died. I may have a mis-matched sample rate hiding somewhere. I'll have to chase it after the webinar. 13:39:14 From John Flaherty : IT Crowd! 13:39:14 From Ray Toler : QUESTION: Are all four monitors driving off the same vidcard and, if so, what is it? 13:39:40 From Ronnie Lawson : which mac is he using? 13:40:03 From Dan Wool : Trashcan 13:40:03 From Chris T. Anthony : He said Mac Pro trashcan. 13:40:08 From Ronnie Lawson : ah…thanks 13:40:09 From Sean Martin : i think a Darth Vader tissue box 13:40:20 From Ken Thies : Yep. Switched zoom output to go straight to the M4 instead of soundflower, popping is gone. 13:40:24 From Ray Toler : I had the same issue when hooking up my multi-monitors via HDMI for a streaming video switcher 13:40:29 From Dan Wool : thx adam…..there y go 13:40:42 From Rich Switzer : Been there, done that! 13:40:56 From Ray Toler : If you set up Windows the way you want it and *never change anything again*, they’re really pretty stable. 13:42:28 From Workman, Glenn M. : Ray: Sounds like a Jenga tower to me, just don’t remove that last piece :) 13:42:55 From Ray Toler : Yep. Jenga is a very apt metaphor. 13:43:28 From Adam Goldman : Ray/Glenn: alternatively, DUCT TAPE the whole Jenga tower asap. 13:44:02 From Ray Toler : Apple’s direction over the last few years has me considering a Windows machine for the first time in decades. Still not there yet, though. 13:44:10 From kennethpage : Joey is very lively, energetic & informative 13:44:17 From Adam Goldman : (I know a bunch of folks who literally taped their PCs up so they weren’t able to make changes without a lot of work to unearth the thing…and of course, they ended up covered with adhesive.) 13:44:47 From Ray Toler : Adam, I prefer a big vat of epoxy. ;-) 13:44:56 From Adam Goldman : Ray!!! 13:45:33 From Jose Gonzalez Palma : Theres no way to batch change several “track takes” at the same time right? you have have to change one at a time? I’ve tried my modifiers but nada 13:45:57 From Workman, Glenn M. : Art/Creative - vs. - Work/Craft 13:46:00 From Ken Thies : Not DUCT tape, GAFF tape! 13:46:02 From Adam Goldman : I think, Jose, temporary groups can allow that if you have the setting correct in groups 13:46:03 From Jay Farber : You could KM it 13:46:19 From Dan Wool : The BMI is the same regardless of the level 13:46:41 From kennethpage : Yes Dan 13:46:53 From Jose Gonzalez Palma : ahh good tip. Will check out thanks Glenn 13:47:03 From Jose Gonzalez Palma : Adam! 13:47:06 From Adam Goldman : I’m Adam. Glenn’s the good looking one. :-P 13:47:17 From Jose Gonzalez Palma : hahah I have bad vision 13:47:29 From Jose Gonzalez Palma : you both look very handsome 13:47:31 From Adam Goldman : you’re fortunate 13:47:40 From Ken Thies : Jose: during tracking sessions, ctrl-option-n creates new takes on all record-enabled tracks. Otherwise, track groups would be the way to go. 13:47:44 From Workman, Glenn M. : Adam & Glenn have never been seen in the same room together. 13:47:53 From Dan Wool : Even tacit bars get BMI if they’re on the cue sheet :) 13:48:12 From Jose Gonzalez Palma : Sweet thanks Ken 13:49:17 From Adam Goldman : Ken/Jose: I was referring to the “WW” trick Matt’s mentioned before (as opposed to a Track Group assignation, but either way would work…)…though Ken’s call is a great one…cleaner, and likely faster. 13:49:50 From Ken Thies : I relied on the ctrl-alt-n thing daily when working in the studio... 13:50:23 From Jose Gonzalez Palma : Gotcha Thanks guys 13:50:38 From Dan Wool : Yeah, but then the wiper wouldn’t be anywhere useful if the score and the sequence are on different bars 13:50:39 From Timmy Samuel : If I set ignore mistakes my chart would be empty 13:51:08 From Scott Dorton : HaHA, Timmy 13:51:30 From Ray Toler : “No mistakes, Timmy, just happy accidents.” —Bob Ross 13:52:45 From Adam Goldman : of course, “only mistakes” might be interesting too 13:52:49 From Reed Robins : I’d like to be able to see two pages side by side in QS. 13:53:05 From Ken Thies : Reed: great idea! 13:53:06 From Adam Goldman : Reed: I think that’s an option 13:53:19 From Thomas : I'm really really impressed with DP10. I'm believing that DP should be an industry standard just like PT claims to be. 13:53:20 From Aaron Whittier : Question for Joey, Could he talk about his usage of clippings? 13:53:23 From Eric Chapelle : Yes, to two pages in QS! 13:53:23 From Reed Robins : @ Adam - Really!??!?! 13:53:37 From Reed Robins : I can’t find it. 13:53:40 From Adam Goldman : Reed: I could be wrong, and not running DP currently 13:53:53 From Adam Goldman : might have to do with window size/width 13:54:02 From Adam Goldman : fuzzy memory there 13:54:08 From Reed Robins : I’ll look a little Adam. 13:54:24 From Ken Thies : Adam/Reed: I'm looking too... 13:54:36 From Reed Robins : Let us know Ken! 13:55:04 From Ray Toler : With the ARM transition looming, there’s no real point in the new Mac Pro unless you absolutely need it for and can fund it from a current project. 13:55:10 From Ray Toler : IMO, anyway... 13:55:29 From Ray Toler : Not that I wouldn’t accept one as a gift... 13:55:41 From Dan Wool : No ARMs in the MP roadmap that I’ve seen 13:56:22 From Ray Toler : Dan, I’m worried about the softdev side of things… unless they come up with something as good/better than Rosetta was. 13:56:24 From Jay Farber : I took a Master class with Randy Many years back and they have they same VIB 13:56:35 From Jay Farber : Vibe 13:56:45 From Workman, Glenn M. : At any time you can save the chat by clicking on the 3 dot bubble that is in the Chat typing field 13:57:03 From Jose Gonzalez Palma : Nice, I love how the cello works with the movement of the Camera 13:57:08 From Jose Gonzalez Palma : float with it 13:57:51 From Workman, Glenn M. : Great emotional support 13:58:07 From Jose Gonzalez Palma : beautiful 13:58:20 From Eric Chapelle : emphatic! 13:58:25 From Dan Wool : Ray: I see. So apps might stop developing intel versions 13:58:43 From kennethpage : Arm is on the way 13:58:49 From Terry Leigh Britton : Lovely 13:59:04 From Workman, Glenn M. : Dan: The transition from Intel to ARM will likely be similar to the last transition TO Intel which took about 5 years. 13:59:33 From Ken Thies : Re ARM processors, aren't they a newer approach to reduced instruction set processors, similar to the old RISC processor in SUN stations? 13:59:43 From Charlyn Bernal : Glenn or Adam - say hello to Joey for me if you have time - I have a film class! 13:59:45 From Ray Toler : Yeah, I don’t see many firms, especially smaller ones, writing for two entirely different architectures. The Intel move made sense for a lot of folks because it made Windows/Mac versions viable. ARM will be a different bag entirely, but the compiler tools may be much better now than they were 10-15 years ago. 13:59:59 From Workman, Glenn M. : Charlyn: Will do. 14:00:03 From kennethpage : Bye Charlyn 14:01:03 From Dan Wool : Yeah. There’s been no mention of ARM MPs, but it’d be really hard to sell $20k Macs if they did 14:01:07 From Ray Toler : But similar to the Intel transition, I’ll likely “freeze” a machine the same way I froze a G4 Tuppermac to run OS9. 14:01:24 From Ken Thies : Ray: yeah, I tried to set up a Linux station years ago as a cross-compiler.. real pain in..certain anatomical zones... ;-) 14:01:33 From Ray Toler : :) 14:01:38 From Bradley DePasse : I miss O.S. 9! 14:01:41 From Adam Goldman : Clippings are awesom 14:01:42 From Adam Goldman : 3 14:01:43 From Adam Goldman : e 14:01:45 From Adam Goldman : :-) 14:02:04 From Ray Toler : I like “Eight people clap A” :-) 14:02:30 From Ken Thies : Re the 2-page question: still looking, if I find anything I'll post it in MOTU gurus. 14:02:41 From Reed Robins : Thanks Ken!! 14:02:42 From art2ro : Hey Adam, ask about favorite virtual instruments and libraries! 14:02:45 From Ray Toler : Bradley, I keep thinking I miss it, then I go and use it and immediately wish I was back on OSX. 14:02:45 From Workman, Glenn M. : Sometimes you don’t know you either have it or need it till you know it exists. 14:02:51 From Aaron Whittier : Fantastic, thank you taking my question. Clippings rule! 14:03:29 From Jose Gonzalez Palma : This is great, thanks so much Joey 14:03:58 From Ray Toler : I keep waiting for Superior Drummer to go on sale... 14:04:12 From Adam Goldman : Ray: talk to Caxa. ;-P 14:04:25 From Raymond Melvin : Does Joey use electronic drums into his DAW, and if so how does he control latency? 14:04:28 From Ray Toler : I’m not falling for that again. He’s too expensive. 14:04:28 From Caxa : Haha 14:05:05 From Jay Farber : Thanks Joey, And all. 14:05:16 From Raymond Melvin : Thanks Adam 👍🏽 14:05:19 From Russ Pfeifer : Is Superior Drummer Sampled or Modeled? 14:05:35 From Workman, Glenn M. : Russ: I believe they are all samples. 14:05:39 From Ray Toler : Yep… Joey’s definitely related to my inner monologue. 14:05:40 From Jay Farber : Samaples 14:05:48 From Timmy Samuel : Ray! 14:06:01 From Ronnie Lawson : hah! 14:06:08 From Ken Thies : Thank you! 14:06:12 From Jay Farber : They have sales regularly for Sample sets 14:06:15 From Caxa : My favorite drum machine is XO by XLN Audio (the addictive drums mob) 14:06:16 From John Boyle : Thanks Joey 14:06:20 From Jose Gonzalez Palma : Just thanks so much for doing this Joey 14:06:21 From Jose Gonzalez Palma : 1 14:06:24 From Adam Goldman : Russ SD3 is sampled 14:06:32 From Scott Dorton : Awesome, Joey. Thanks to all! 14:06:35 From Ronnie Lawson : maybe a bit off-topic, but how does he handle the stress of tight deadlines? 14:06:36 From Jose Gonzalez Palma : Matt, Adam and Glenn 14:07:29 From Andrew Culver : What keyboard is it? 14:07:32 From Workman, Glenn M. : I think have a little more travel on the keyboard rather than the pads can be a plus. 14:07:55 From Mark Rasmussen : Glenn:yes 14:08:06 From Ray Toler : I do the same… try to never have more than 4 simultaneous MIDI notes. 14:08:21 From Jose Gonzalez Palma : Question: Is he controlling Dynamics, Modulation etc from the faders of the Akai 226? 14:09:19 From Workman, Glenn M. : Andrew: I think he said it was an Akai model. 14:09:34 From Jay Farber : MPD226 14:09:35 From Dan Wool : Ray: Why?…why just 4. I missed it 14:09:50 From Jay Farber : 2 hands 2 feet 14:09:50 From Adam Goldman : DanW 4 limbs on a drummer. 14:09:56 From Jose Gonzalez Palma : I see his doing it now 14:09:58 From Jose Gonzalez Palma : thanks :) 14:10:02 From Ray Toler : When programming drums, if you’re hitting more notes than a drummer has limbs, it can sound unnatural. 14:10:06 From Dan Wool : Ha! Oh. 14:10:10 From Eric Chapelle : Right on Joey! 14:10:34 From Andrew Culver : The main keyboard is a Doepfer did he say? 14:10:55 From Ray Toler : Andrew, yes. 14:10:57 From Dan Wool : Q: Any other KM shortcuts? 14:11:31 From Dan Wool : I love it 14:11:47 From Andrew Culver : LMK 2+ 14:11:52 From Workman, Glenn M. : LMK2 Plus 14:11:53 From Andrew Culver : Thanks 14:11:56 From Ray Toler : Another model I see used a lot: https://www.sweetwater.com/store/detail/LMK4plus--doepfer-lmk4-master-keyboard-with-hammer-mechanics 14:12:27 From Ray Toler : Here’s the 2+ https://www.sweetwater.com/store/detail/LMK2plus--doepfer-lmk2-master-keyboard-with-hammer-mechanics 14:13:36 From Jose Gonzalez Palma : That was a great question Adam, thanks for Asking. Always good to hear how the pros deal with it with Family etc 14:13:47 From Dan Wool : How to delegate wouldn’t be a bad webinar topic. I can’t figure out how to do it and I really need to 14:14:28 From Ray Toler : Dan, my “real” gig is executive coaching and that’s a very common issue. I’ll be happy to chat about it any time. 14:14:33 From Ronnie Lawson : thanks so much for speaking on this topic 14:15:00 From Dan Wool : Ray: I might! It’s a problem currently 14:15:30 From Dan Wool : Ray: Are on MOTUguru? 14:15:35 From Dan Wool : *you 14:15:50 From Ray Toler : I am. You can also find me at rtoler at gmail. 14:16:04 From Victor LeComer : Urei 14:16:15 From Dan Wool : Ray: Got it. Thanks 14:16:15 From Tom Lewis : Great session… Thanks Joey, Matt, Glenn & Adam!!! 14:16:22 From kennethpage : Once again, Joey is Lively, Energetic, and very informative. This has been great. Thanks Matt, Glenn, Adam and especially Joey. 14:16:48 From Ray Toler : Great session. Thanks, Joey! 14:16:59 From Workman, Glenn M. : Thanks Joey. Great guest and wonderful enthusiasm. 14:17:00 From Adam Goldman : Joey’s fantastic! 14:17:18 From Russ Pfeifer : This has been a great one 14:17:33 From Jose Gonzalez Palma : Thats awesome Ray, would love to reach out to you sometime too. 14:17:43 From Ray Toler : Any time! 14:17:48 From Jose Gonzalez Palma : Thanks 14:17:53 From Adam Goldman : Ray’s fantastic! 14:17:57 From Sean Martin : Thank you Joey, Matt, Adam, Glenn this was great. 14:18:03 From Adam Goldman : (Toler-ific ™ ) 14:18:07 From Dan Wool : Yeah. I’m exhausted from watching this one! A lot of info 14:18:13 From Ray Toler : lol. Adam, I need to hire you for PR. 14:18:23 From Adam Goldman : Ray!! 14:18:35 From Ray Toler : “Adam Goldman, Vice President, PR and Horn Lines” 14:19:12 From Ray Toler : It’s that “creating the sound of the show” process that is still so difficult. 14:19:16 From Adam Goldman : I made my wife “President of Communications” at my company. She said, “YOU’re the president, I can’t be president.” I replied, “I’m president, you can be whatever I say.”) 14:19:20 From Workman, Glenn M. : Yes, now put in more banjo, accordion, and harmonica. 14:19:26 From Adam Goldman : and cowbell 14:19:52 From Sean Martin : more cowbell 14:20:07 From James Tran : More cowbell 👍 14:20:24 From Adam Goldman : thanks to everyone! 14:20:27 From Russ Pfeifer : That may be enough cowbell 14:20:30 From Ken Thies : Many thanks! 14:20:34 From John Boyle : Yay!!!!! 14:20:36 From Ray Toler : [clap clap clap!] 14:20:36 From Jose Gonzalez Palma : Thanks All! Joey, Matt, Adam, Glenn! 14:20:40 From Bradley DePasse : Thanks Joey!! 14:20:40 From Ronnie Lawson : another great Webinar..thanks all! 14:20:43 From Eduardo Valenzuela - Chile : Thanks Joey, Matt, Adam & everyone!!! 14:20:45 From Reed Robins : Thanks Joey!!! 14:20:49 From Raymond Melvin : This never gets old 14:20:50 From Bradley DePasse : And Matt , Adam and Glenn!! 14:20:50 From Victor LeComer : Cheers, all. Thanks, Joey! 14:20:52 From Jeff Taylor : Thanks Joey 14:20:53 From darrellsmith : Thanks Joey!!!!!!!! Matt, Adam and Glenn! 14:20:54 From Jay Farber : Thanks 14:20:55 From EDWARD DILLON : thank you!! 14:20:56 From Raymond Melvin : Cheers All! 14:20:57 From Andrew Culver : Thanks Joey, Matt, Glenn, Adam. As always! 14:20:59 From darylwaters2018 : Thanks. 14:21:00 From Jose Gonzalez Palma : DIGITAL CALPS!! 14:21:00 From Eric Chapelle : Thanks Joey, Matt and Adam! 14:21:02 From kennethpage : EXCELLENT ALL. 14:21:02 From Mark Rasmussen : Matt adam Glenn Joey,….thanks 14:21:07 From Warren McRae : Thanx all!!! 14:21:07 From Workman, Glenn M. : At any time you can save the chat by clicking on the 3 dot bubble that is in the Chat typing field 14:21:08 From Brian : Thanks guys! 14:21:09 From Aaron Whittier : Thank you Joey, Matt, Adam & MOTU! 14:21:13 From Daniel Scott : Thank you 14:21:26 From Raymond Melvin : 👏🏽