13:46:31 From Kubilay Uner : When I do real right click it works 13:47:16 From Ross Levinson : Still have a pair of EL Distressors - love them - will never give them up! 13:47:23 From Dan Wool : I think all the UA compressors have mix function now…for EZ parallel compressing 13:48:07 From Dan Wool : …in-line 13:48:28 From Ross Levinson : But UA still does not have side-chaining 13:48:55 From Ray Toler : David Roth, what Matt’s covering now is why I record around -12. When I learned gain staging my mixes magically tightened up. 13:49:12 From Glenn Workman : Robert (I think): You were asking about where to put the Search file. Its in this document: https://www.freqsound.com/motuuserfiles/MOTUWebinarExtras.pdf 13:49:28 From Ray Toler : Prior to gain staging, my mixes sounded like they were full of “sand” 13:49:43 From Ray Toler : Which I now know was a ton of digital clipping in the mix. 13:50:18 From Paul Lenart : How can I get to the plug in deep dive? 13:50:33 From Dan Wool : Ross, do all UA compressors have sjidechaining? I don’t see one on the LA2A 13:50:43 From David Roth : I can see how after staking a bunch of these in a chain, it would be easy to have clipping and not know that’s the reason for the unwanted change in sound. 13:51:32 From Glenn Workman : Paul: Some of the previous webinars have started to post at the link below. At the bottom of the page are links to each month. Only a few have been posted so far. https://motu.com/en-us/products/software/dp/webinars/ 13:51:42 From Gary Chase : Meter bridge to check gain staging 13:52:00 From Paul Lenart : Thanks Glenn! 13:52:00 From Gary Chase : Thanks glen! 13:53:00 From David Roth : (stacking a bunch...) 13:53:16 From Björn Lindén : very low volume ? 13:53:21 From Glenn Workman : For folks who haven’t done this before: Participants panel, there is a Raise Hand button to ask a question. Lower your hand when finished. Matt will unmute your mic to ask your question. 13:53:36 From Ross Levinson : dan wool - No - UA does NOT offer side-chaining on any of their plugins 13:54:33 From Ray Toler : After seeing that, I feel better about my tool bar. :) 13:57:36 From Dan Wool : Ross: Too bad. I wish DP would allow this to happen for every plugin, but I guess it’s plugin dependent. Also, I was wrong only certain UA plugins allow a mix between the compressed and uncompressed signal. 13:58:50 From Andrew Culver : Raoul: have you tried Soundflower? 13:59:08 From Terry Leigh Britton : I physically loop my 828's S/PDIF back to itself so I can use a DP output as an input to another piece of software (which uses the S/PDIF out as its source). That keeps it at the hardware level and lowers latency of the send.. 13:59:29 From jraoul : Andrew - I seem to have it installed, but have no idea how to use it. Some quick research suggests it’s been supplanted by Loopback (the software, not the Motu M4 feature) 13:59:45 From Dan Wool : I wish everything in these webinars was much louder. Even Matt is cranked on my HomePods and could be louder 13:59:52 From jraoul : Terry - I still have my old 828, but no more Firewire ports! 13:59:53 From Ross Levinson : Dan: Yeah - That’s UA plugins one major drawback - no side-chaining capability. I end up going to other plugins when I need side-chaining 14:00:08 From Robert Turner : I gotta gig in Alpine, TX tomorrow so I need to bail so I can get the band trailer ready for the 4-hour trip. See ya'll next Tues. Great Session!! Thanks Matt, et al. Have a Great Father's Day Weekend!! Bye 14:00:08 From Glenn Workman : Dan: Funny, usually people were saying he was TOO loud until recently. 14:00:15 From Dan Wool : Ross: Me too :( 14:00:21 From Glenn Workman : Robert: Have a great gig. 14:00:28 From jraoul : Terry, pt 2: The M4 doesn’t have enough channels to do that kind of physical patching 14:00:33 From Robert Turner : Thx, Glenn!! 14:00:43 From Andrew Culver : Raoul: I use it all the time. Simplicity itself. It’s just a bus, but one that goes between applications. 14:00:48 From Ross Levinson : Loop Loft 14:00:50 From Charles White : LOTS of stuff from Splice 14:00:54 From Russ Pfeifer : Cheers Robert 14:01:11 From Mark Kelso : DrumCore4 14:01:11 From Ross Levinson : https://www.freqsound.com/motuuserfiles/ 14:01:16 From Bradley DePasse : Addictive Drums are awesome 14:01:22 From Ross Levinson : https://www.thelooploft.com 14:01:26 From Mark Kelso : Band in A Box 2020 has some great drums too 14:01:33 From Dan Wool : Glenn: I don’t think so. Steve Steele was plenty loud. Also, too loud I can turn down of course 14:01:41 From Stuart Fox : Kieth Leblanc released a tonne of drum loops 14:01:43 From Craig H : Realidrums is pretty cool 14:01:56 From Stuart Fox : Really messy and disorganised but some gold in there 14:02:00 From Stuart Fox : And it was cheap 14:02:14 From Björn Lindén : There is a Volume control in the prefernces in zoom… 14:03:51 From Dan Wool : Bjorn: Thanks! The Zoom pref is linked to the OS volume. Is that not what you have ? 14:04:23 From Dan Wool : …in other words both are Maxed 14:04:50 From Björn Lindén : but how is your master volume set ? 14:05:28 From Björn Lindén : play around with them a bit, and got it the way I like. :-) 14:06:05 From Terry Leigh Britton : jraoul - just as a thought on the latency, be certain not to be using any compressors or limiters in your audio path, as they often introduce their own latency. 14:06:07 From Dan Wool : I’m on a laptop via Apple HomePods. They’re maxed…and they CAN be loud AF 14:06:31 From Björn Lindén : odd :-| 14:06:44 From jraoul : Tx Terry — no, that’s not the problem, but good to keep in mind. Right now I’m just trying to get the basic set-up, but once I figure that out, I do intend to add fx to my voc. 14:08:12 From Björn Lindén : I’m on a macbook. nothing else…. 14:08:49 From Ross Levinson : How did Matt do that automatic continuous input setup? 14:09:06 From Dan Wool : Ah. Did I mention that I’m deaf? :) 14:09:23 From Björn Lindén : WHAT ??? :-) 14:09:34 From Glenn Workman : Ross: Studio Menu/Track Assignments 14:09:44 From Terry Leigh Britton : Track Assignments in Studio. 14:09:55 From Ray Toler : Consecutive assignment is such a huge timesaver! 14:09:57 From Ross Levinson : Thanks Glenn! 14:10:01 From steve ertel : Thanks for the drum/perc sources, all. 14:10:01 From Andrew Culver : Raoul: Do you see Soundflower in and out in your Mac sound preferences? 14:10:10 From Dan Wool : Ross: And you still have headroom in th MacBook? 14:10:10 From jraoul : Andrew - yep 14:10:19 From Ross Levinson : Glenn - is there short-cut for that? 14:10:36 From Adam Goldman : Ross L option-A 14:10:41 From Andrew Culver : Raoul: So choose the SF out in DP 14:10:53 From Andrew Culver : And SF In where you want it to go 14:11:01 From Glenn Workman : Ross: like Adam says, but you can also change it to anything you want in the Commands window. 14:11:14 From jraoul : Andrew - Tx! I’ll give it a shot 14:12:27 From Ross Levinson : Thanks Adam! Found it. 14:12:30 From Ray Toler : Multi-record is how I have to operate 95% of the time because I’ve got too many drum machines that like to send notes automatically from their sequencers. 14:12:42 From Glenn Workman : Any vs. specific input needed in MultiRecord. 14:12:57 From Terry Leigh Britton : NI Komplete Kontrol does NOT work unless you are in Multi-Record. This is because of the DAW channel that causes a feedback loop in Single-Record mode. 14:13:03 From Russ Pfeifer : Ray - me too 14:13:37 From SAMartin : Sounds like my double note issue that I solved by making the midi port active for USB 14:13:39 From Bradley DePasse : Multi-record is the only way I function too. Too many input options especially if you’re using the keyboard your controlling from as a sound source and have to turn off local control 14:14:04 From Glenn Workman : SAMartin: Possibly, but it sounds like it was specific to a certain VI for him. 14:14:55 From Terry Leigh Britton : The "naughty" VI is the Komplete Kontrol software itself! :-) 14:15:00 From Glenn Workman : Bradley: I always have Local OFF in my studio for that reason. 14:17:05 From Ross Levinson : Thanks Adam! 14:17:20 From Terry Leigh Britton : No, there is not a fix beyond that! :-) 14:17:49 From Ross Levinson : Gotta bounce - thanks everyone! As always, great session! 14:17:55 From Ray Toler : @Glenn Workman - as long as we’re in controller land, do you know of any way to get the K2600 to send transport signals to DP? 14:17:55 From Glenn Workman : Matthew: Its mentioned above in the chat that its a reality of Komplete Control. Scroll up through the chat, or save the chat with the little 3 dot bubble here in the chat text field. 14:18:02 From Bradley DePasse : @Glenn Workman - absolutely - except when I’m tweaking a patch on that synth 14:19:00 From Glenn Workman : Ray: You can map the buttons on a K2600 to any function that DP supports in the Command window. 14:19:28 From Ray Toler : Ok… I’ll dig back into the manual. Thanks! 14:19:37 From Rigo Mora : Greatnews!!!!! 14:19:47 From Glenn Workman : Ray: Or send me an email and we connect directly. glenn@freqsound.com 14:20:05 From Victor LeComer : Kontakt sometimes will have a single MIDI channel plus a multi MIDI assignment in a single instrument. 14:20:36 From Terry Leigh Britton : Chris really needs to try Komplete Kontrol with DP in single mode... 14:21:04 From Terry Leigh Britton : Doesn't work... 14:21:30 From Terry Leigh Britton : It is because of the "Any" character of single mode. 14:21:31 From Adam Goldman : Chris Peck: what sort(s) of functionality will that host integration allow/provide? 14:22:05 From Ray Toler : I’d be interested in the Komplete Kontrol, but no sliders/faders. I’ve gotten too addicted to them on the Kurzweil. 14:22:41 From Terry Leigh Britton : The knobs are really smooth, Ray. I have two. S-88 Mk1 and S-49 Mk2 14:23:23 From Ray Toler : Terry, yeah - the feel of the whole thing is great, but I can’t control multiple things simultaneously while playing (think orchestral programming, etc.) 14:24:27 From Terry Leigh Britton : Ray, I admit I use an old Peavey PC 1600x slider box for those challenges! :-) 14:24:37 From Ray Toler : The blinky lights, though… so sexy. 14:25:52 From Terry Leigh Britton : The scribble-strip info is incredibly useful. 14:26:18 From Bradley DePasse : It’s seeming critical to build a template for my studio before I do any more work! 14:27:03 From Terry Leigh Britton : Bradley, catch that Modular Templates thing from Steve Steele when it is published - a great approach. 14:27:58 From Ray Toler : Was going to say the same thing as Terry. Build a template, then break things into clippings. Super fast to build a custom template for each new project that way. 14:28:31 From Bradley DePasse : I saw that the other day! Very cool. Just need to gain some efficiencies as I move from track to track and project to project 14:28:33 From Andrew Culver : That last idea about the mix bus compressor sounding like everything is going through it even when soloing just one sound — that is a killer idea. 14:28:48 From Glenn Workman : Bradley: You can visit his website for some more info on his approach and his templates: https://www.stevesteele.com 14:30:10 From Bradley DePasse : Got it. Also need help getting more out of my MOTU 16A interface as a mixer for vocal overdubs and monitoring 14:32:01 From Bradley DePasse : On a side note: I wish Unisyn was brought up to date!! I have a lot of external midi instruments 14:32:09 From Ray Toler : I once had my master controller pitch bend wheel go just slightly bad. Spent 3 weeks trying to figure out why everything kept going out of tune, seemingly randomly. 14:32:26 From Terry Leigh Britton : MidiQuest is still in development and works great! 14:33:11 From Glenn Workman : Gary: You can make the computer “the network” and connect wirelessly to that if there is no shared router. 14:33:12 From Bradley DePasse : I’ve got that! 14:33:19 From Adam Goldman : thanks!! 14:33:20 From Ken Thies : Thankyou! 14:33:25 From Glenn Workman : Thanks Matt. 14:33:27 From Ray Toler : Thanks, Matt! 14:33:31 From SAMartin : Thank you Matt. 14:33:31 From William Baird : Thank you Matt. 14:33:32 From Erik Ibsen-Nowak : THanks, Matt! 14:33:32 From Glenn Workman : Click the 3 dot bubble to save 14:33:34 From Charlyn Bernal : Thank you!