12:27:14 From Angela Wilson : i guess there's no other ladies lol :( 12:28:12 From Glenn Workman : There have been the past couple webinars. I see Carol and... 12:28:21 From Carl (Colorado) : That’s OK we’re a bunch of old goats 12:28:53 From Sergio : Hello everyone! Anyone know where I can find the last sessions (webminar)? Thanks in advance 12:29:12 From Glenn Workman : I don’t believe they been uploaded yet. 12:29:18 From Luke Steward : i’m doing just dandy 12:30:19 From Jonathan Scales : Hello. When will the previous webcasts be uploaded, and where will they be housed? 12:30:28 From Jim Cooper (MOTU) : We’re still working on posting the past webinars. Hope to do so soon. 12:30:38 From John Burke : Is there an option to connect audio by phone? 12:30:58 From Bob Frye : I would love to get a quick re-presentation of that loop recording / memory cycle bit from day one. I tried it ystrdy and came up slightly baffled. anyone else? 12:31:29 From Musicworkshop Room2 : Hey Glenn! 12:31:35 From Adam Goldman : there have been a lot of keystroke/shortcuts mentioned so far. (I only made the last webinar, having received notice the day prior.) 12:31:42 From Glenn Workman : Hi Jim Jones. 12:31:50 From Carol Laula : Hi Everyone - I hope you are safe and well. Greetings and good wishes from Glasgow Scotland x 12:31:54 From Ross Levinson : Good morning everyone! 12:32:04 From Garry Norman : Very grateful that you Guys are producing these webinars …. Well done, Thank you! 12:32:20 From Adam Goldman : Is it possible to get some sort of list of the shortcuts (not counting Commands, which can be keyboard shortcut customized)? 12:32:27 From jeffersonjarvis : there is a Zoom app for the iPhone which allows you to connect via audio 12:32:50 From Garry Norman : Yay!!! 12:32:55 From John Burke : Thanks Jefferson 12:35:03 From Jim Cooper (MOTU) : All the shortcuts are in the Commands window. 12:35:21 From Roger Neill : where do I find INSERT MEASURES? 12:35:47 From Glenn Workman : Commands are in the Setup menu, and you can print that window. It will print all the way to the bottom, or you can save as pdf from that print window (Mac) 12:36:09 From Jim Cooper (MOTU) : Just hit SHIFT-SPACEBAR and type “Insert Measures” : ) 12:36:10 From Max Winkels : you can insert measures from the Conductor Track 12:36:38 From Jim Cooper (MOTU) : You don’t have to hunt for commands. Just type their name in the Run command bar (shift-spacebar). 12:39:12 From rich switzer : does that replace Mach5? 12:39:16 From Robert Turner : UVI Vintage Organ Library is GREAT!!! 12:39:42 From Jim Cooper (MOTU) : UVI Workstation is kind of like a “lite” version of MachFive. 12:40:06 From Glenn Workman : Not as full featured as Mach5, and no where near as big a default library. However you can use the .ufs files from Mach5 and other MOTU VIs in UVI Workstation. 12:40:24 From Jim Cooper (MOTU) : +1 12:40:26 From Garry Norman : OMG …. I just did some tracks for my friend Garry Lynn Floyd!!! 12:40:38 From Jim Cooper (MOTU) : Cool! 12:41:19 From rich switzer : thanks 12:41:55 From jr b : Can’t hear the bell tree 12:42:04 From Adam Goldman : Jim…does option-click for Solo as Matt just mentioned appear in Commands window too? 12:42:25 From Garry Norman : Did hear audio from DP 12:42:58 From Jim Cooper (MOTU) : Option-click and command-click are global conventions in DP for “select only” and “select all except” 12:42:59 From Glenn Workman : Option-click most controls will mean “only me”, command-click on most controls will mean “everyone but me”. 12:43:23 From Roddy J. Betancourt : Not sure how to have tracks in folder categories like this. 12:44:16 From Luke Steward : thats a neat little hi-hat thing 12:44:40 From Roddy J. Betancourt : How do group tracks into folders? 12:44:59 From Roddy J. Betancourt : *to 12:46:07 From jason : Just right-click your track(s) and select “New track folder from selected tracks” 12:46:28 From Roddy J. Betancourt : Thanks! It’s been a while. 12:46:43 From Glenn Workman : Highlight the Track names. In the Project Menu choose Track Folder/New Track Folder from Selected Tracks. 12:47:02 From Jim Cooper (MOTU) : Help menu > DP User Guide > Track Folders and Track Groups (p. 187) 12:47:16 From Roddy J. Betancourt : Thank you all! 12:50:03 From Roddy J. Betancourt : So much to read… so little screen space (even with a 27” screen. hahaha). 12:51:02 From jr b : In addition to name of button in info bubble, reminder of shortcut would be good. 12:51:33 From Jim Cooper (MOTU) : Except that many of them can be customized : / 12:51:52 From Roddy J. Betancourt : It would need to be a dynamic pop-up then 12:52:10 From Jim Cooper (MOTU) : True 12:52:36 From jr b : A guy can dream, can’t he? 12:53:01 From gregchastain : Did anyone get Matt LaPoint’s preferred short cut list? 12:53:13 From Craig Carothers : I didn’t 12:53:21 From Jim Cooper (MOTU) : Yes, dream away. All features requests are welcome. 12:53:29 From Reed Robins : Would love to see Matt’s list! 12:53:53 From Craig Carothers : Jim, did you get the Zoom Audio Primer PDF I sent you this AM? 12:53:54 From Jonathan Freilich : I did not 12:54:03 From Jonathan Freilich : no 12:54:07 From Glenn Workman : Craig: I did. 12:54:14 From Craig Carothers : YAY 12:54:15 From gregchastain : Hello Jim Cooper did you guys get a chance to send those yet? 12:54:15 From Roddy J. Betancourt : I have the same mic in my studio that Matt is using. I’d like to know the cable and stand he’s using if possible. 12:54:20 From Helen McMillin : Could you add the default key commands as an appendix to the manual? 12:54:23 From Jim Cooper (MOTU) : Yes, Craig thought I responded. If Id din’t sorry… 12:54:29 From jason : Why would anyone want to pull a fill DOWN? (Can you tell im a drummer?) :D 12:54:37 From Craig Carothers : HA 12:54:56 From Vanessa Garde : Jim, we have a “power DP user group” in Spain, with top film composers from here and we have a list with requests. Would it be possible to touch base about it with you by email? Thanks! 12:55:31 From Craig Carothers : Jim, no email from you, no prob, glad you got it 12:55:46 From Thomas Renken : Very nive 12:56:17 From Jim Cooper (MOTU) : We’ll review it after todays session. We did manage to enable the stereo audio option and Matt is playing DP in stereo now. Woo hoo! 12:56:25 From Jim Cooper (MOTU) : Vanessa, absolutely! jim@motu.com 12:56:40 From Ross Levinson : Hi Craig - I’ll take the Zoom primer as well: iearmusic@verizon.net 12:56:51 From Vanessa Garde : Excellent, thank you very much! We’ll touch base soon then! :-) 12:57:09 From Thomas Renken : sweet 12:57:26 From eva ugalde : ¡Hola Vanessa y Paula! 12:58:45 From Craig Carothers : Ross… sent 12:59:33 From Roddy J. Betancourt : Key 1 & Key 2, explain again please 12:59:54 From Roddy J. Betancourt : doesn’t one cancel the other? 13:00:01 From Jim Cooper (MOTU) : Each command can have two different keystrokes assigned to it to invoke it. 13:00:05 From jr b : Can you scrub a MIDI track? Can you scrub a Clip? 13:00:11 From Jim Cooper (MOTU) : Yes 13:00:14 From Roddy J. Betancourt : ahh. thanks. 13:00:32 From geebo2b : I tried setting up kboard shortcuts..and every time I tried to assign a key..It told me that that key was already used for another parameter.. 13:00:33 From Roddy J. Betancourt : as long as Key 2 it isn’t assigned to another. 13:00:34 From jr b : Jim, maybe include whose question you’re answering. 13:02:11 From Glenn Workman : You can have the same key assigned to multiple commands as long as those actions occur in different windows (Sequence Editor vs. MIDI or Tracks Overview. You can also delete any you don’t use if there is a conflict, or re-assign the lesser used command. 13:02:30 From Roddy J. Betancourt : Thanks Glenn 13:02:41 From Glenn Workman : For example Matt is using M for the Mute Tool, but the DP default for that is control-M. In my world M is to place a Marker. 13:05:32 From Jacki Barineau : How do you copy an audio track from one to another without it shifting positions? 13:05:46 From Glenn Workman : Jack: Having the grid on. 13:06:03 From Jim Cooper (MOTU) : Or shift key as Matt is saying 13:06:04 From Jacki Barineau : Thanks! 13:06:15 From Jacki Barineau : I knew there had to be a way lol 13:06:42 From Glenn Workman : Shift drag is a common Mac convention for “constrain while moving”, works in many programs. 13:06:48 From Ross Levinson : Only if you have not slid the track at all 13:06:57 From Jacki Barineau : Got it! 13:07:14 From Glenn Workman : Ross: That’s why having the grid on makes it obvious if you’ve dragged a bit left or right. 13:08:00 From Brian Luce : Is there any way to set the grid to off as a default? 13:08:10 From Garry Norman : So there is a automatic cross fade when cutting and flying parts of a track? 13:09:01 From gregchastain : I can get to all the tools… what key gets back to the pointer 13:09:29 From Roddy J. Betancourt : greg, the “A” key should 13:09:48 From gregchastain : thank you that was it… 13:10:10 From Roddy J. Betancourt : :) 13:10:43 From gregchastain : I use a raven so I don’t use the keyboard much but now I’m doing more on just the Laptop remote… Matts webinar is really helping 13:11:28 From Glenn Workman : Brian: to have the grid default to off - Open your default sequence, turn the grid off, then save that as the new empty template. 13:11:41 From Brian Luce : Thanks 13:11:56 From Glenn Workman : Brian: Turn it off in both the Sequence Editor and MIDI Editor. 13:12:11 From jr b : Virgil’s tone of mystery is SO familiar. 13:12:31 From jr b : I don’t have the same problem, but the same tone of voice with other problems. 13:12:36 From Carol Laula : Angela Wilson, I wondered that too - I think there are a few of us - precious few! Hello 13:12:41 From Glen Deskin : Are replays of these webinars available? 13:12:50 From bmcbean49@sbcglobal.net : Can I record this session please? 13:13:05 From Angela Wilson : Hahah yes Hi Carol 13:13:06 From Glenn Workman : Glen: They haven’t posted them yet, but are working on it and will when available. 13:13:20 From Andrew Culver : What’s the URL for the previous webinars? Thanks. 13:13:24 From Glen Deskin : Great! Thanks! 13:13:26 From bmcbean49@sbcglobal.net : Thank you 13:13:31 From Glenn Workman : bmcmcbean: No you can’t record them, the instructor has that function disabled. 13:13:39 From Victor LeComer : When you save make sure you have save audio files 13:13:51 From Robert Turner : I had similar problems transferring files from DP8 to DP10! 13:15:36 From geebo2b : My list of tools in the sequence window is different than Matt’s list 13:15:46 From Ross Levinson : Is there any way to trim all 4 tracks at once? 13:16:04 From Glenn Workman : Ross: You can enable/disable any combination of tools you like to use in the Preferences. 13:16:04 From Jim Cooper (MOTU) : Yes you can trim all at once 13:16:18 From Bill Spencer : ross- select them all before using the tool 13:16:24 From Jim Cooper (MOTU) : Thanks Glenn : ) 13:16:25 From Ross Levinson : Thanks 13:16:45 From Glenn Workman : Ross: Also you’re view may be different (the icons are similar) if you use a different Theme that Matt is using. 13:16:48 From Roddy J. Betancourt : It looked like they were all selected. 13:16:52 From Ross Levinson : Love that! 13:16:56 From Roddy J. Betancourt : He still did it individually. 13:17:03 From Roddy J. Betancourt : ? 13:17:25 From Jim Cooper (MOTU) : You can also use the track group feature, or the temporary group features Matt covered in the first webinar. 13:17:37 From Jacki Barineau : This is crazy good!! Y’all need to make a video and/or document that just shows like “100 little known tips and tricks for DP” lol 13:17:48 From geebo2b : I see all tools selected specifically I don’t see the Magnifier tool 13:18:02 From Roddy J. Betancourt : What I meant was, Matt had all 4 tracks selected, but he still had to trim individually. 13:18:52 From geebo2b : I missed the Disable grid function..what was the button to disable grid? 13:19:16 From Jim Cooper (MOTU) : Command key 13:19:26 From Jacki Barineau : That’s amazing! 13:19:27 From rich switzer : my split is option Y..... 13:19:34 From Thomas R : cool 13:19:37 From rich switzer : default? 13:19:38 From Roddy J. Betancourt : Can he do the slip again? 13:19:50 From Roddy J. Betancourt : before/after 13:20:00 From Glenn Workman : geebo: Its called Zoom (in the English version) . You also might need to set the Control Panel preference that says: Keep Tool Palette visible. 13:20:14 From Stephen Burch : Gotta go. Thanks Matt. 13:21:02 From Roddy J. Betancourt : Why does the audio image disappear when sliding? 13:21:18 From Sandor : Can you paste the selection with a fade onto another track 13:21:39 From Sandor : Basically superimposing the fade and boundary onto another track? 13:24:56 From Thomas R : Track pads are great for that as well… 13:25:14 From jr b : Is there a mod key for H to zoom in and out? 13:25:20 From Doug Nagel : Ditto on trackpad. Two-finger scroll works really well 13:26:41 From geebo2b : I was able to open the tool commands as Matt is showing but it is floating..how do I get it to attach to the Transport bar section? 13:27:25 From Doug Nagel : Preferences / Control Panel / check Editor Tools 13:27:27 From Jim Cooper (MOTU) : Right-click the control panel to open the prefs, where you can control tool placement 13:27:43 From Bill Spencer : wish we could set the resolution for the auto grid- it’s always too coarse for me 13:27:46 From Glenn Workman : geebo: Control Panel preferences: Dock The Control Panel in the Consolidated Window. 13:27:55 From Doug Nagel : sorry, Shortcut Buttons I meant 13:27:56 From geebo2b : thank you 13:28:29 From Roger Neill : Sorry, someone asked this question earlier but i missed it. Why am i not seeing the same tools as matt ? 13:28:29 From Jacki Barineau : When quantizing midi track is there a way to make sure it also keeps the controller data in the right place? When I do this, my sustain on/off always gets displaced. 13:28:50 From Vanessa Garde : On the MIDI Window, there are numbers assigned to move quickly between certain cc’s. Can we assign one of those numbers to display velocity on the lower side of the midi editor? 13:29:45 From Diane Scanlon : PLEASE REMIND ME ON ZOOM WITH GREEN BAR 13:30:09 From Roddy J. Betancourt : Hmm, would have liked to hearth result. 13:30:16 From Roddy J. Betancourt : *hear 13:30:31 From Glenn Workman : Jacki: I believe there is a recent preference added for that. 13:30:48 From Jacki Barineau : Thanks, Glenn - this messes me up all the time! 13:31:20 From Bill Spencer : what are the red lines in the SBs? 13:31:36 From Roddy J. Betancourt : After cutting to the beat grid, can you shift the audio to snap to it to quantize? 13:31:50 From Jacki Barineau : I was wondering the same thing, Roddy! 13:31:56 From Roddy J. Betancourt : Jim? 13:32:01 From Roddy J. Betancourt : Is it possible? 13:32:02 From Jim Cooper (MOTU) : Yes, you can quantize the resulting soundbites 13:32:19 From Craig Carothers : How? 13:32:21 From Jim Cooper (MOTU) : Or you can quantize the beats within the audio 13:32:22 From Roddy J. Betancourt : so the beat cuts will be the quantizing placement? 13:32:24 From Jim Cooper (MOTU) : Either way 13:32:33 From Glenn Workman : Jacki:Its in the Quantize Window, turn on Custom edit filter there, and you can select/deselect Move MIDI and Quantize MIDI settings to get what you want. 13:32:41 From Roddy J. Betancourt : I mean only with the beat cuts. 13:32:52 From Roddy J. Betancourt : I know how to quantize 13:32:53 From Craig Carothers : audio quantize 13:33:00 From geebo2b : Found it thanks..but I selected some other things here and there and it got weird but I stumbled onto the right thing 13:33:21 From jr b : Yeah, what are those red lines? 13:33:33 From Roddy J. Betancourt : He explained it, thanks. 13:33:50 From Jim Cooper (MOTU) : Red lines mean that the beat map in the audio doesn’t currently match the sequence time line 13:33:52 From Roddy J. Betancourt : Still confused it doesn’t seem it snapped to the red line beat cuts 13:34:14 From geebo2b : Ah Quantize..I have never used quantize that it made things better..obviously I don’t know how to use it..but it always quantized in a way to totally mess up the beats 13:34:31 From Ross Levinson : I gotta jump. I’m hoping that we get access to these webinars … Thanks! 13:34:42 From jr b : Bye, Ross 13:35:00 From Bill Spencer : thanks jim 13:35:09 From Craig Carothers : Me too… looking forward d to watching these again. 13:35:24 From Jim Cooper (MOTU) : Bye guys, thanks for joining 13:36:01 From geebo2b : Yes I need a video of this..it is too fast for me to take notes..I tried referencing in the user manual..but it is next to impossible to follow the User manual in a way that is like a tutorial..To many page jumps to get definitions 13:36:53 From geebo2b : and I find that many times ..sub menus mini menus, are not easy to find many times..until I stumble onto the correct window and use a specific function 13:37:07 From Sandor : I don’t have relative in my window next to marker 13:37:18 From Sandor : Is that something I need to enable 13:37:27 From Glenn Workman : Sandor: What version DP are you using? 13:37:38 From Sandor : 10.11 13:37:47 From Roger Neill : same here 13:38:26 From gregchastain : same 13:38:43 From Ken Thies : same here. 13:38:59 From geebo2b : How did Matt show that marker window? 13:40:26 From jr b : I don’t have Nudge but I do have Rel 13:40:34 From Sandor : I see relative in the Snap Information pane 13:40:49 From rich switzer : Shift click markers to extend selection 13:40:51 From Sandor : But not in the window itself as Matt had it displayed 13:41:41 From Jim Cooper (MOTU) : If you click the “G” next to the grid settings, you’ll open the panel that has all these settings 13:43:39 From jeffersonjarvis : right click anywhere in the “snap” section to configure what you see 13:43:47 From jr b : Thanks, Jim 13:44:38 From Bill Spencer : Suggest he check the Commands window to see if it’s reassigned? 13:44:49 From geebo2b : Ok I found the G and the menu opened up on the Left side..I didn’t see that at first..I expected a drop down menu..thanks 13:45:30 From geebo2b : I see snap Relative also..ok 13:45:32 From geebo2b : thanks 13:45:45 From Glenn Workman : To see all the settings that Matt has for Grid: as Jim mentioned click the G in a circle. In that window you might need to also go to the mini-menu and turn on Configure Info Bar to see all the options. 13:46:12 From Victor LeComer : Was that Command or Control G 13:46:26 From geebo2b : control G 13:46:43 From Jim Cooper (MOTU) : Thanks Jefferson: right-click on the “snap” section to configure what is shown in that section. 13:46:46 From Victor LeComer : He said “command” 13:46:52 From Vossi : Sorry, I have to leave now - Nice job friends, I’m doing my next DP Webinar for our German customers on next Thursday. Greetings from Vossi -MOTU Support Germany- :-) 13:47:03 From Sandor : Thanks Jim I found it in the submenu of the Snap Information panel 13:47:10 From geebo2b : command? ok heard a control G 13:47:21 From Jim Cooper (MOTU) : Thanks Vossi!!! 13:47:27 From Jim Cooper (MOTU) : Stay safe! 13:47:39 From Victor LeComer : The user said command 13:47:41 From Vossi : you too Jim, bye… 13:47:50 From Garry Norman : Are we coming to the end for today? 13:48:58 From Bill Spencer : I wish there was a modifier to use when dragging or nudging to toggle the grid— command-arrow would nudge while toggling the grid, if that makes sense 13:50:52 From Thomas R : Thanks Guy! Got to go… 13:51:45 From Jim Cooper (MOTU) : Bill, not sure what you mean... 13:51:46 From gregchastain : he means thexlr 13:52:49 From Glenn Workman : Its in the mini-menu of the Snap Information window 13:52:51 From jr b : My Snap Info window does show the Nudge parameters, but it doesn’t affect the display in the Seq window. 13:52:53 From Bryan : Might try two-finger click 13:53:04 From Bryan : if it’s a touchpad 13:53:12 From Sandor : Click on the G 13:53:18 From jr b : ConfigureInfo Bar opens another window, but it doesn’t relate to Snap Info 13:53:24 From jr b : No option for Configure Snap Section 13:53:27 From Sandor : Then click the mini menu 13:53:35 From Roger Neill : That worked for me 13:53:35 From Roddy J. Betancourt : He needs to go to settings for track pad 13:53:44 From Glenn Workman : JIm: the mini-menu in that window has to be on. 13:53:46 From Roddy J. Betancourt : nevermind 13:53:51 From Roddy J. Betancourt : never mind 13:53:54 From Paul Williams : Can you proportionally quantise towards the beat grid? 13:54:03 From Helen McMillin : Command click let’s you configure that. 13:54:14 From jr b : Info Bar prefs list seven windows, none of them Snap Info 13:54:49 From Glenn Workman : Control-drag a soundbite will snap in either direction. 13:55:12 From Glenn Workman : It acts much like throwing playing cards in a solitaire computer game. 13:55:28 From Paul Colombo : Thank you! Looking forward to seeing the videos again. How will we get to know when they are done? 13:56:12 From Glenn Workman : The cursor also changes to a throwing hand when throwing soundbites 13:56:52 From jr b : Aha! Cmd click button in upper RH corner of Snap Info window adds check boxes to the items. Click button next to Nudge and it appears. Voila! 13:56:55 From Roque Baños : Hi Tim, I have another question, there was a feature in previous DP versions that would update the insert event type to the selected one. Is there a way to have this back? 13:57:43 From Glenn Workman : Control Panel 13:58:07 From jr b : Another wish: restore Loop feature. Clips are great, but not the same thing. 13:58:30 From Jim Cooper (MOTU) : RIP loops 13:58:44 From Jim Cooper (MOTU) : Clips are better : ) 13:59:02 From jr b : Not for me. can I talk to you about it off-zoom, or should I just give it up? 13:59:25 From Jim Cooper (MOTU) : We can talk…loop therapy session. : ) 13:59:45 From jr b : Don’t want to clutter up chat column with off-topic. Got e-mail? 13:59:46 From geebo2b : I agree,, I have used DP for years and it is like I have been using a race car just to drive to Ralph’s market 14:00:13 From Jim Cooper (MOTU) : Clips aren’t done yet as a feature, so we can add functionality as time goes on that replaces whateever you need from loops. jim@motu.com 14:00:13 From Michael Canavan : You guys should do a webinar on Clips and Loops, I get a lot of questions from DP users on them 14:00:41 From geebo2b : I cannot find a start to finish tutorial with clips and files included to actually take me from start to finish in learning this great DAW 14:00:43 From Jim Cooper (MOTU) : Yes, good suggestion 14:00:57 From geebo2b : I can’t afford to go to Berklee or some major school to master this 14:01:04 From Roger Neill : Looking forward to Friday’s webinar. Got many questions about that 14:01:28 From jr b : Amen Geebo. One of MOTU techs gave me a quick primer that helped, but I still have a ways to go. 14:01:48 From Michael Canavan : Also Jim this isn’t a question to ask Matt here, but is MOTU planning or thinking about haptic LED response on controllers like you get using other Clip DAWs with controllers like Launchpad etc? 14:02:02 From geebo2b : Matt is great..but it goes so fast..I am still searching for one item and he has gone 4 light years ahead 14:02:04 From Glenn Workman : There is a demo of Clips on the MOTU site from the NAMM show in January. Its a good place to start. 14:02:39 From Jim Cooper (MOTU) : Yes we are looking at clip controllers 14:02:41 From gregchastain : Matt I’m getting whiplash hahaha 14:02:48 From geebo2b : I am not a recording engineer..but the ability to create own DP10 is what I am interested in 14:03:10 From geebo2b : to not just record but then edit and sound design 14:03:51 From Roger Neill : Picture! Yes 14:04:17 From geebo2b : I missed the Sequencer and Audio section last week..My computer crashed midway in the webinar at about 10:30 and I spent until 9:30 pm getting it back up and running 14:04:47 From Jim Cooper (MOTU) : Picture, definitely. Thanks Angela. 14:04:59 From Jim Cooper (MOTU) : We hope to post last week’s webinars soon. 14:05:05 From Helen McMillin : Angela, email me if you have questions. helen@doubledogmusic.com. 14:05:24 From Sandor : My questions 14:05:38 From Sandor : Can you determine the number of samples in a selection 14:05:40 From Angela Wilson : Thank you! Will do 14:05:43 From paul : Can you audition an audio clip just by clicking and holding like in older versions of DP (as opposed to having to use transport controls)? 14:06:00 From Sandor : Can you convert a selection to a set of markers, start and stop 14:06:05 From Helen McMillin : no problem 14:06:09 From Jim Cooper (MOTU) : Paul yes, with audible mode turned on 14:06:18 From paul : got it. Thankks! 14:06:31 From Angela Wilson : I was not aware of any of MOTU's webinars before this week, what did you cover in the last one? 14:07:08 From geebo2b : Many years ago there was an independent person who put out a tutorial on DP4 that I bought and it came with audio and midi files to do all the tutorials..it was fairly basic..but that is what I need 14:07:29 From Rebecca : Hi Angela, last Friday was Tuning vocals and instruments 14:07:39 From Rebecca : Last Thursday was Shortcuts to speed up your workflow • Work faster with Temporary Groups. • Learn the new Memory cycle and Auto Record Strips. • Master the selection and memory transport controls. 14:07:56 From Angela Wilson : Cool, thank you Rebecca 14:08:24 From Rebecca : They were both insanely informative - I’ve been a MOTU user for over 15 years and I’ve never known them to do this 14:08:30 From Jim Cooper (MOTU) : Thanks Angela you beat me to it. 14:08:35 From Paul Colombo : geebo2b Producing Music in DP by Ben Newhouse 14:08:47 From Roddy J. Betancourt : If anyone here has experience with a Yamaha MOXF6 using it with DP for MIDI parts and triggering DP virtual instruments also, PLEASE let me know. I’m having difficulty. 14:09:03 From Roddy J. Betancourt : I’m on an iMac 14:09:05 From Angela Wilson : I definitely hope to watch the recording of last Thursday's session 14:09:12 From Aryeh Har-Even : I also did not know of the previous recent webinars. Agreed, it would be great to have access to them. Thanks so much for the invite and a great session, Matt, Jim & Motu! 14:09:23 From Jim Cooper (MOTU) : We will do a session on virtual instruments 14:09:42 From Glenn Workman : Roddy: if you want to try and connect after this webinar you can email me glenn@freqsound.com 14:09:49 From Roddy J. Betancourt : Thanks, Jim. It’s just the MOXF6 is quite complicated to set up with DP 14:09:59 From Roddy J. Betancourt : Thanks Glenn 14:10:09 From Roddy J. Betancourt : My contact: roddyjbetancourt@yahoo.com 14:10:45 From Roque Baños : Hi Jim, is there a short cut to clipping windows? 14:11:31 From Paul Williams : Will you be covering vracks? 14:11:31 From Jim Cooper (MOTU) : Not sure… hang on.... 14:11:49 From Richard Peiser : Are virtual instruments treated differently? 14:12:11 From Glenn Workman : Roque: yes there are commands available in the Commands window. Most are unassigned by default 14:12:39 From roger : Hi Jim, Where on the Motu website will the webinar recordings appear? 14:12:45 From Carol Laula : Gotta go - its dinner time here in Scotland - THANK YOU x 14:12:46 From Rebecca : Thanks to Jim and everyone at MOTU - I can’t believe people use anything from Avid. In over 15 years I’ve had *one* corrupted project in DP. In PT, I can’t COUNT how many corrupted projects…. 14:13:02 From Angela Wilson : I'd like to know too Roger 14:13:40 From Roque Baños : Thanks Jim! I meant to just bring up the windows. I can’t find it 14:13:50 From Glenn Workman : BTW for anyone here last week, saving Chat was not available. It is now if you click the … bubble in the chat window. 14:13:59 From paul : The throw command was mentioned earlier when dealing with audio. Can you throw MIDI? For example, if I select 2 measures of MIDI data in track view, can I throw the selection to next closest measure with MIDI data in the same way as with audio? 14:14:08 From Roddy J. Betancourt : Can we still use Chunks to create a separate sequence? I use to do that in Performer 2.5 14:14:40 From Glenn Workman : Roddy: Yes, just make New Sequence rather than Duplicate Sequence etc. 14:14:41 From Jim Cooper (MOTU) : Don’t think that Clippings windows have a shortcut…. 14:15:10 From Roddy J. Betancourt : Glenn: Thanks again. 14:15:17 From Roque Baños : This would be helpful. I use them a lot and they are always hiding under other windows 14:15:17 From Aryeh Har-Even : Nice to see you, Reed. U still at the same place? I’m still uptown. Our old Motu meetups in the 2000’s were fun. Hope you’re doing well. 14:15:24 From jr b : Thanks — very clear explan of vrack. 14:15:47 From Kevin Sterchi : My concern was the phase problems associated with sound bites 14:15:49 From Angela Wilson : So are chunks sorta like Markers where you skip that start time, they seem really similar? 14:15:55 From gregchastain : the cat is out 14:15:58 From jr b : Amen, David 14:16:01 From Reed Robins : Hi Aryeh! Yep still in the same place. Nice to see you here! 14:16:37 From Aryeh Har-Even : Stay safe. And that’s for everyone, everywhere. Crazy time! 14:16:49 From Reed Robins : Thanks, you too! 14:16:58 From Glenn Workman : Angela: Chunks can be entire sequences inside the same DP Project. They can be as simple or as complicated as you like. 14:17:30 From Angela Wilson : Ok thanks Glenn! 14:17:33 From Helen McMillin : Angela, think of Markers as road signs. Think of Chunks as sections of the road. 14:17:37 From Glenn Workman : Angela: Chunks can be duplicates of a Sequence so you can have different edited versions of the same material. 14:17:48 From Roque Baños : Sorry for so many questions Tim. There use to be a feature of the event type would update to the selected data. Still an option? 14:17:56 From Sandor : I have a big issue where the windows never stay in sync 14:17:58 From Angela Wilson : That's a good way to think of it 14:18:11 From paul : Jim: I know you can’t get to everyone’s questions, but can you use the throw command with MIDI data in track view just like you would with sound clippings? 14:18:16 From Sandor : This always happens when I switch between chunks 14:18:18 From Rebecca : Jim - have y’all considered creating a DP group on Slack or fb or other social site ? Or does one already exist? 14:18:53 From Glenn Workman : Sandor: That was covered last week, but the short answer is there is a preference to keep the different editors all switching to the currently active chunk. 14:19:08 From Bill Spencer : It happens to me too occaisionally 14:19:19 From Sandor : Yea, I have that setting set correctly, as far as I can tell 14:19:33 From chris : There is the MOTUNation.com forums 14:19:34 From Sandor : But it happens at least 5 times a dat 14:19:37 From Sandor : *day 14:19:48 From PMortise : Hi Everyone - the NAMM/Steve Steele clippings reference that was made earlier…is there a video link to that? 14:20:16 From chris : maybe the MOTU youtube channel has it 14:21:00 From ab : I have the same problem of davisdavis. Try to change chunks in the menu under the main counter. For me it's work 14:21:42 From Glenn Workman : https://www.youtube.com/user/motuTV 14:21:54 From PMortise : I found a :59 “sneak peak” on Steve’s channel, but nothing on MotuTV 14:21:54 From Roque Baños : YES VANESSA THERE IS A SHORT CUT 14:22:02 From Jim Cooper (MOTU) : There’s a DP group on FB 14:22:05 From Roque Baños : SHOW ONLY... 14:22:53 From Roddy J. Betancourt : Roque: Where is the Show Only command? 14:22:55 From Jim Cooper (MOTU) : Thanks Roque 14:23:01 From Jim Cooper (MOTU) : Commands window 14:23:04 From Roddy J. Betancourt : right click? 14:23:18 From Roddy J. Betancourt : Can it be assigned a shortcut? 14:24:37 From Ken Thies : Would chunks help? One chuck = strings, one cunk = brass, etc. Then a song chunk would layer them together for the final... ? 14:25:09 From Roque Baños : YES THAT’S IT 14:25:41 From Glenn Workman : Ken: You can do that, and multiple Sequence chunks play at the same time in a Song chunk. 14:25:51 From Roque Baños : INPREVIOUS DPs the insert tenet type updated to the selected one 14:25:59 From Glenn Workman : Demo of Clips (not from NAMM): https://www.youtube.com/watch?v=QLzrBh0Fl68 14:26:10 From Roque Baños : Sorry I meant the insert event type 14:26:21 From Ken Thies : Yep, that's what I mean. Hard to see all tracks together that way though, so YMMV... 14:26:47 From Glenn Workman : Ken: You also have to watch out for tempo issues, since a Song contains its own Conductor track. 14:26:56 From Vanessa Garde : GRACIAS ROQUE!!! :-) 14:27:00 From Roque Baños : THANKS A LOT JIM, THANKS A LOT MATT, I HAVE TO LEAVE 14:27:03 From Vanessa Garde : Thanks for all the responses and suggestions 14:27:15 From Robert Turner : Gotta Scoot. Thanks Matt & Jim. This is very informative. See ya Thurs - Be Safe. 14:27:15 From PMortise : Thanks Glenn Workman👍🏽 14:27:37 From Jim Cooper (MOTU) : Thanks for joining, people! 14:27:41 From Roddy J. Betancourt : Roque: Thanks, also. 14:27:47 From Ken Thies : Yeah, good point. Depending on the situation, it would either make things easier or a lot harder. 14:28:16 From Bill Spencer : He thinks you can have multiple CHANNELS in ma single MIDI track 14:28:35 From Bill Spencer : (diff chans for each articulation) 14:29:02 From Glenn Workman : Jim/Matt: Make sure you give people time to save the Chat if they are interested in doing so. 14:29:39 From Edward@L.A.MusicLab : I missed the first Zoom with you, I’d love to watch it when available. edward@lamusiclab. Thanks 14:29:43 From Jim Cooper (MOTU) : Can you guys save it? 14:29:51 From Jim Cooper (MOTU) : Glenn? 14:30:05 From miles : we can save but need your approval 14:30:08 From Glenn Workman : Jim: The save option is the little … bubble in the Chat. It IS available today.